518134
10
Zoom out
Zoom in
Previous page
1/44
Next page
8
Learn your Platinum 770
Needle Threader
Switch off the main switch.
The needle must be in the up position
to use the needle threader. We also
recommend lowering the presser foot.
1. Pull the needle threader all the way
down, catching the thread under the
guide (a).
2. Bring it forward until the metal
anges cover the needle. A small
hook will pass through the needle
eye.
3. Place the thread around the guide
(a) and under the fl anges in front
of the needle, so the thread catches
into the small hook.
4. Let the needle threader gently swing
back. The hook pulls the thread
through the needle eye and forms
a loop behind the needle. Pull the
thread loop out behind the needle.
5. Place the thread under the presser
foot and cut the thread.
NOTE: The needle threader is designed to be
used for size 70-120 needles. You cannot
use the needle threader for size 60 needles
or smaller, the wing needle, twin needle,
triple needle or when the Buttonhole Sensor
Foot is on. There are also some optional
accessories that require manual threading of
the needle (see below).
When threading the needle manually make
sure that the needle is threaded from front
to back. The white presser foot ankle makes
it easy to see the eye of the needle. The
bobbin case cover can be used as a magnify-
ing glass.
1.
3.
4.
5.
2.
a
a
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Platinum 770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Platinum 770 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info