477554
20
Zoom out
Zoom in
Previous page
1/208
Next page
5. Turn the ignition key to the neutral position (B). Hold
the position until the glow indicator lamp on the
steering wheel panel goes out.
6. Turn the ignition key to the start position (A).
7. When the engine starts, immediately release the
ignition key to neutral position (B).
B
A
CAUTION: Do not run the starter for
more than 5 seconds at a time. If the
engine does not start, wait 15 seconds
before you try again.
8. Push the throttle control gradually forward to the end
position.
9. Let the engine run at half throttle for 3-5 minutes
before you apply a heavy load.
10. Push the throttle control to full throttle position.
CAUTION:
To engage the blades when the
engine is at full speed causes strain on the
drive belts. Do not apply full throttle until the
cutting deck is lowered to the mow position.
To operate the product
1. Start the engine.
2. Release the parking brake.
3. Carefully press down 1 of the speed pedals. The
speed increases the more the pedal is pushed down.
Use pedal (A) to move forward, and pedal (B) to
move in reverse.
B
A
4. Release the pedal to brake. To brake harder, press
down the other speed pedal.
Note: For P 525D, lock the speed with the speed
control catch. Refer to
Speed catch - P 525D and P
525D with cabin on page 6
.
5. Pull the PTO button to engage the drive of the
blades on the cutting deck.
To operate the speed control catch
The speed control catch can be set by foot to maximum
speed or low speed. Use maximum speed when the
cutting deck is in the transport position. Use the low
speed when the cutting deck is in the mow position.
B
A
C
For low speed, push the speed control catch to the
middle position (A).
For maximum speed, push the speed control catch
fully forward (B).
To disengage the speed control catch, push the
speed control catch fully rearward (C).
20
740 - 004 -
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P525D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P525D in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 18,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna P525D

Husqvarna P525D User Manual - German - 208 pages

Husqvarna P525D User Manual - German - 56 pages

Husqvarna P525D User Manual - Dutch - 208 pages

Husqvarna P525D User Manual - Dutch - 56 pages

Husqvarna P525D User Manual - French - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info