477554
19
Zoom out
Zoom in
Previous page
1/208
Next page
To apply the hydraulic pressure, close the valve nut
(B) fully and then tighten the locknut (A).
Front axle
To release the hydraulic pressure, open the locknut
(A) ¼–½ turn counterclockwise and then the valve
nut (B) 2 turns counterclockwise.
A
B
To apply the hydraulic pressure, close the valve nut
(B) fully and then tighten the locknut (A).
To lift the cutting deck
1. Push the PTO button in to disengage the drive on
the cutting deck.
2. Move the lift lever to the transport position (D) to lift
the cutting deck.
D
Note:
You can lift the cutting deck a small distance
with the drive on the blades engaged. Use this
function for very long grass or rough surfaces.
To lower the cutting deck to the
mow position
1. Move the lift lever for hydraulic lift forward to lower
the cutting deck to mow position.
2. Pull the PTO button out to engage the drive on the
cutting deck blades.
To start the engine
1. Release the hydraulic pressure. Refer to
To release
and apply the hydraulic pressure on page 18
.
2. Apply the parking brake.
3. Push in the PTO button to disengage the drive of the
cutting deck.
4. Move the throttle control to the middle position.
740 - 004 -
19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P525D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P525D in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 18,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna P525D

Husqvarna P525D User Manual - German - 208 pages

Husqvarna P525D User Manual - German - 56 pages

Husqvarna P525D User Manual - Dutch - 208 pages

Husqvarna P525D User Manual - Dutch - 56 pages

Husqvarna P525D User Manual - French - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info