477553
30
Zoom out
Zoom in
Previous page
1/52
Next page
30 – English
Maintenance
Change PTO belts
Always replace the belts in pairs.
1 Prevent the engine from starting by removing the ignition
key before making any adjustments or performing
maintenance.
2 Fold down driver's seat.
3 Remove the cover plate of the hydraulic pump drive shaft.
4 Unscrew the cable bridge
5 Unscrew the bolts (1) of the coupling that connects the
drive shaft and the hydraulic pump and remove the spacer
ring (2) from the coupling. The drive shaft must be locked
with some kind of tool, for example. a big U-spanner or
screwdriver.
6 Loosen the lock nut (3) and the lower screw (4) until it is
completely free from the belt tensioner.
7 Remove rear bearing spacer screws (5) and remove the
spacer (6).
8 Cut/pull off the old belts.
9 Pull the new belts through the gap between the spacer
ring and the hydraulic pump.
10 Feed the lower part of the strap between the bearing
bridge and the bracket.
11 Pull the belt onto the pump belt pulley first and then onto
the lower belt pulley. Repeat the procedure with the
second belt.
12 Fit the spacer (6) to the bearing bridge and screw the
bearing bridge tight with the associated screws (5).
Torque 47 Nm.
13 Replace the spacer ring (2) and screw the hydraulic pump
securely to the drive shaft. Torque for the screws (1) is 47
Nm.
!
WARNING! Protect your hands with gloves
There is a risk of crush injuries when
working with the belt.
5
6
5
6
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P520D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P520D in the language / languages: English as an attachment in your email.

The manual is 10,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna P520D

Husqvarna P520D User Manual - English - 208 pages

Husqvarna P520D User Manual - German - 208 pages

Husqvarna P520D User Manual - German - 56 pages

Husqvarna P520D User Manual - Dutch - 208 pages

Husqvarna P520D User Manual - Dutch - 56 pages

Husqvarna P520D User Manual - French - 208 pages

Husqvarna P520D User Manual - Italian, Portuguese, Spanish - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info