610257
7
Zoom out
Zoom in
Previous page
1/52
Next page
Instruction book/Manual de instrucciones Lily 535
7
Unpacking
1. Place the machine on
the table or cabinet,
remove the pack-
aging and lift off the
cover.
2. Remove the side
parts of the packing
material, the exten-
sion table, the foot
control and finally
the protection cover.
3. The machine is
delivered with an
accessory bag, a main cord and a foot
control cord.
4. Wipe the machine, particularly around the
needle and needle plate to remove any
soil before sewing.
1. Poner la máquina encima
de la mesa de trabajo y
levantar la cubierta.
2. Saque las protecciones
laterales, la tabla de
prolongación, el pedal y
finalmente el plástico de
protección de la
máquina.
3. La máquina está equipa-
da con una bolsa de
accesorios, el cable para
la red y el cable del
pedal.
4. Limpiar la máquina, especial-mente
alrededor de la aguja y la placa de aguja.
Desembalaje
Embalaje después de
coser
1. Unplug the cords from the
wall socket and the
machine.
2. Wind the cords around
your hand and place the
foot control cord in the
foot control storage space
and the main cord in the
pocket of the cover. There
is also space provided for
the operating manual.
3. Check to ensure that all
accessories are in the
accessory tray. Slide it onto the machine
behind the free arm.
4. Lower the presser foot.
5. Place the foot control, underside toward
you, on the accessory
tray at the back of the
machine, where also
the extension table is
placed. Make sure the
extension table is fitted
into the right part of the
accessory tray and fold
the table toward the
machine. Fold down
the handle and replace
the cover.
Packing away after
sewing
1. Sacar el enchufe de la red y
de la máquina.
2. Luego enrollar los cables al-
rededor de la mano e intro-
ducir el cable del pedal en
el hueco del pedal y el
cable de la red en el bolsil-
lo de la cubierta. Allí tam-
bién hay sitio para el
manual de instrucciones.
3. Asegurarse de que todos los
accesorios estén en la caja
de accesorios. Luego colo-
carla debajo del brazo libre.
4. Bajar el prensatelas.
5. Ponga el pedal - con el lado inferior hacia
adelante - encima la caja de accessorios en
la parte trasera de la máquina. Coloque
en la parte trasera de la
placa de base la tabla de
prolongación.
Asegúrese de que encaje
en la parte derecha de la
caja de accessorios y baje
la tabla de prolongación
hacia la máquina. Baje el
asa y coloque la tapa.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Lily 535 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Lily 535 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info