518115
20
Zoom out
Zoom in
Previous page
1/32
Next page
18
Sewing
1.
3.
4.
2.
Sewing Zippers
The zipper foot E can be snapped on so that
it is located either to the right or to the left
of the needle, making it easy to sew both
sides of the zipper. To sew the other side of
the zipper, reposition the zipper foot.
Lapped Zipper
1. Sew the seam together to the bottom of
the zipper placket. Baste the rest of the
seam. Leave about 2 cm open at the top.
Press seam open. Set the needle to the
right position.
2. Place presser foot E to the left of the
needle. From the wrong side fold the
fabric to one side so both seam allow-
ances are free. Fold and press the left
allowance under approximately 0.5 cm
from the basted seam.
3. Place the zipper under the folded seam
allowance with the teeth as near to the
fold as possible and stitch zipper to fabric
close to fold. Begin sewing at the bottom
of the zipper. Before reaching the zipper
pull, lift the presser foot and slide the
zipper pull down past the zipper foot.
Lower the foot and sew to the top of the
zipper.
4. Snap on the zipper foot so it is to the
right of the needle. Set the needle to the
left position. Turn the garment to the
right side. It is important that the seam on
the right side is sewn straight. Before you
begin to sew, mark the seam line. Sew
the other side of the zipper.
Begin stitching across the bottom and
continue upwards. Remove the basting.
If you want to sew a ”gentleman’s zipper”,
follow the instructions but insert in the other
direction.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Lena at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Lena in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info