733909
22
Zoom out
Zoom in
Previous page
1/560
Next page
To start the product
1. Connect a power cord to the socket below the
handle.(Fig. 61 )
2. Put the power cord in the power cord holder. Refer
to
To use the power cord holder (model LC 141C) on
page 16
.(Fig. 62 )
3. Stay behind the product.
4. Loosen the start inhibitor.(Fig. 63 )
5. Push the motor brake handle in the direction of the
handlebar.(Fig. 64 )
To stop the product
1. Release the motor brake handle to stop the motor.
(Fig. 65 )
2. Disconnect the power cord from the mains and then
from the product.(Fig. 66 )
CAUTION: Pull the plug straight out. Do
not pull the power cord.
To get a good result
Always use a sharp blade. A blunt blade gives an
irregular result and the cut surface of the grass
becomes yellow. A sharp blade also uses less
energy than a blunt blade.
Do not cut more than ⅓ of the length of the grass.
Cut first with the cutting height set high. Examine the
result and lower the cutting height to an applicable
level. If the grass is very long, drive slowly and cut 2
times if necessary.
Cut in different directions each time to prevent
stripes in the lawn.
Maintenance
Introduction
WARNING: Before you do maintenance, you
must read and understand the safety
chapter.
For all servicing and repair work on the product, special
training is necessary. We guarantee the availability of
professional repairs and servicing. If your dealer is not a
service agent, speak to them for information about the
nearest service agent.
Maintenance schedule
The maintenance intervals are calculated from daily use
of the product. The intervals change if the product is not
used daily.
For maintenance identified with *, refer to
Safety devices
on the product on page 16
.
LC 141VLi, LC 141Li and LC 141C Daily Weekly Monthly
Do a general inspection. X
Clean the product. X
Do a check of the start inhibitor *. X
Make sure that the safety devices on the product are not defective *. X
Examine the cutting equipment. X
Examine the cutting cover *. X
Do a check of the motor brake handle *. X
LC 141VLi and LC 141Li only Daily Weekly Monthly
Make sure that the ON/OFF button operates correctly and is not defective. X
Examine the battery for damage. X
Do a check of the battery charge. X
Make sure that the release buttons on the battery operates correctly and that the
battery locks into the product.
X
22 71 - 005 - 18.05.2018
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna LC 141Li at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna LC 141Li in the language / languages: All languages as an attachment in your email.

The manual is 6,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info