733907
25
Zoom out
Zoom in
Previous page
1/560
Next page
Transportation, storage and disposal
To set the product in transport position
1. Remove the grass catcher (if installed).
2. Loosen the knobs on the upper handle and fold the
handle down.(Fig. 70 )
3. Loosen the lower knobs.
4. Move the knobs to the lower end of the grooves on
the left and the right side of the product.(Fig. 71 )
5. Fold the handle forward.(Fig. 72 )
Transportation
The Dangerous Goods Legislation requirements
apply to the contained Li-ion batteries.
For commercial transports special requirements on
package and labels must be obeyed.
Make sure that you obey the regulations for
dangerous material when you prepare the product
for transport. Local regulations can apply.
Always remove the battery for transport.
Put tape on the battery connectors and make sure
that the battery cannot move around during
transport.
Attach the product during transport.
Storage
Always remove the battery for storage.
To prevent accidents, make sure that the battery is
not connected to the product during storage.
Keep the battery charger in a closed and dry space.
Keep the battery and the battery charger in a dry
space where there is no moisture or frost.
Disconnect the battery from the battery charger
during storage.
Do not keep the battery where static electricity can
occur. Do not keep the battery in a metal box.
Keep the battery where the temperature is between
5°C and 25°C and out of sunlight.
Keep the battery charger where the temperature is
between 5°C and 45°C and out of sunlight.
Make sure that the battery is charged to 30% - 50%
before you put it in storage for long periods.
Keep the product, battery and battery charger in a
locked area out of reach for children and not
approved persons.
Clean the product and do a complete servicing
before you put the product in storage for a long time.
Disposal
Symbols on the product or the packaging of the product
indicate that this product cannot be handled as domestic
waste. It must be submitted to an appropriate recycling
station for the recovery of electrical and electronic
equipment.
By ensuring that this product is taken care of correctly,
you can help to counteract the potential negative impact
on the environment and people that can otherwise result
through the incorrect waste management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.
(Fig. 73 )
Technical data
Technical data LC 141VLi, LC 141Li
LC 141VLi LC 141Li
Cutting motor
Motor type BLDC (brushless) 36V BLDC (brushless) 36V
Motor speed – SavE, rpm 2700 2700
Motor speed – Nominal, rpm 3100 3100
Motor speed – High load, rpm 3700 3700
Motor output – max. kW 0.8 0.8
Motor output – Nominal, kW 0.55 0.55
Drive motor
Motor output – Nominal, kW 0.25 NA
Self walk speed, km/h 3.0–4.5 NA
71 - 005 - 18.05.2018 25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna LC 141C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna LC 141C in the language / languages: All languages as an attachment in your email.

The manual is 6,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info