Manual Husqvarna LB448S (page 15 of 140) (English, German, Dutch, French, Italian, Portuguese, Spanish)

579204

Zoom out

Zoom in

1/140

MAINTENANCE

English – 15

Changing the oil

The engine oil should be changed the ﬁrst time after 5

hours running time.

The engine oil should be changed each year and every 25

working hours.

When changing the oil proceed as follows::

• Disconnect the HT lead from the spark plug.

• Empty the fuel tank.

• Close the fuel tap.

• Unscrew the oil ﬁller cap.

Place a suitable vessel to collect the oil in.

• Drain the oil by tipping the engine so that the oil runs

out through the ﬁller pipe.

• Ask where you can dispose of surplus engine oil at

your local petrol station.

• Fill with new engine oil of a good quality. See the

Technical data section.

• Now insert the dipstick again, without tightening it.

Check the oil level with the dipstick on the oil ﬁller cap.

If the oil level is low, ﬁll using engine oil up to the upper

level on the dipstick.

• Screw on the oil ﬁller cap.

Drive and gearbox

Ensure the wheels and wheel axles are clean and free

from leaves, grass, etc. It is also important to keep clean

around the drive gearbox.

• Remove the protective cover by unscrewing the

screws.

• Clean the gearbox with a brush. Also check that the

drive belt and belt pulley are undamaged, for example,

no cracks.

Replacing and adjusting the V-belt

• Remove the protective cover by unscrewing the

screws.

• Remove the hubcap on the front wheel by the

gearbox, prize carefully with a screwdriver. Unscrew

the carriage bolt and remove the wheel.

• Remove the belt from the deck belt pulley. Check that

the deck belt pulleys move easily on the axle, spray

with penetrating oil between and behind the pulleys

and grease the axle.

• Fit the new belt and make sure it ﬁts correctly by the

ball-bearing before adjusting the belt.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna LB448S in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 17,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna LB448S Manual

Product: