Manual Husqvarna LB448S (page 13 of 140) (English, German, Dutch, French, Italian, Portuguese, Spanish)

579204

Zoom out

Zoom in

1/140

OPERATING

English – 13

Adjusting the cutting height

The cutting height adjustment is spring assisted. The

cutting height can be adjusted in 6 different steps.

Do not set the cutting height too low as there is a risk that

the cutters might hit ground with unevenness.

• To raise the cutting height move the lever to the left

and then forward.

• To lower the cutting height move the lever to the left

and then backward.

Starting and stopping

Ensure the ignition lead sits correctly on the spark plug.

Starting

• Open the fuel tap.

• Pull the engine brake handle against the upper

handlebar with your left hand.

• Grip the starter handle, slowly pull out the cord with

your right hand until you feel some resistance (the

starter pawls grip), now quickly and powerfully pull the

cord.

Never twist the starter cord around your hand.

Drive

To engage the drive, push the clutch lever forwards.

Stopping

• Stop the engine by releasing the engine brake handle.

The drive is also disengaged when you release the

brake handle. By releasing the brake lever a bit only

the drive will be disengaged.

• Close the fuel tap.

IMPORTANT! Shut down the engine before changing

the cutting height.

WARNING! Note the following before

starting:

Do not start a lawn mower unless the

cutter and all covers are ﬁtted correctly.

Otherwise the cutter could come loose

and cause personal injuries.

Always move the machine away from the

refuelling area and source before

starting.

Place the machine on a ﬂat surface.

Ensure the cutting attachment cannot

come into contact with any object.

Keep people and animals well away from

the working area.

CAUTION! Do not pull the starter cord all the way out

and do not let go of the starter handle when the cord is

fully extended. This can damage the machine.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna LB448S in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 17,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna LB448S Manual

Product: