Manual Husqvarna Huskystar 224 (page 52 of 56) (English)

518064

52

Zoom out

Zoom in

Previous page

1/56

Next page

50

Troubleshooting, continued

Condition

The fabric is

not feeding

smoothly.

Gathering

The machine

does not work.

Patterns are

distorted.

The automatic

buttonhole

stitches are not

working.

Noisy operation

Cause

1. The feed teeth are packed with lint.

2. The stitches are too ﬁ ne.

3. The feed teeth were not raised after being

lowered.

1. The needle thread tension is too loose.

2. The needle is too heavy or light for the

fabrics being sewn.

1. The machine is not plugged in.

2. A thread is caught in the hook

assembly area.

3. The bobbin winder spindle is still

in the winding position.

1. The stitch is not balanced.

2. The stitch lenght is too long or too short

1. The stitch density is not suitable for the

fabric being sewn.

2. Interfacing is not being used with stretch

fabrics.

1. There is thread caught in the hook

assembly area.

2. Lint has built up in the bobbin holder or

hook assembly are.

Reference

Refer to page 47

Make stitch coarser

Refer to page 9

Refer to page 20

Refer to page 11

Refer to page 6

Refer to page 47

Refer to page 13

Refer to page 42

Refer to pages 28, 31

Refer to page 28

Refer to page 47

Refer to page 47

1

How do I set my machine to zigzag
My machine only makes small stitches even when I change the length Submitted on 5-3-2022 at 21:36
Reply Report abuse
I can not replace a new needle. Difficult to find entrance Submitted on 19-2-2022 at 22:45
Reply Report abuse
The machine started bunching all the cotton on the underside of the material and would not progress. In the manual it suggests that lint might have collected, it had, so I cleaned this out thoroughly. I read troubleshooting in the manual and it mentioned the position of the feed teeth and the lever to the back and below the free arm bed, I slid this across and the teeth dropped but would not rise when I slid it back to the "raise feed teeth" position. It had no effect so now cannot use the machine. Can one repair this, if so, how? Thank you. Submitted on 8-12-2021 at 13:25
Reply Report abuse
the reverse is not working, am i missing a setting?
Submitted on 20-4-2020 at 06:58
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Husqvarna Huskystar 224 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskystar 224 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info