Manual Husqvarna Huskystar 224 (page 12 of 56) (English)

518064

12

Zoom out

Zoom in

Previous page

1/56

Next page

10

(3)

(2)

(1)

(3)

(2)

(1)

(1)

(2)

(3)

1

2

1

2

Presser Foot Lifter

The presser foot lifter raises and lowers

your presser foot.

You can raise it about 0.6 cm (1/4˝) higher

than the normal raised position for easy

removal of the presser foot or to help you

place heavy fabric under it.

(1) Presser foot lifter

(2) Normal raised position

(3) Extra lift position

Unplug the power supply before

changing the presser foot.

1. Press the red button on the back of

the presser foot ankle.

The presser foot will drop off.

2. Place the selected presser foot so

the pin on the foot lies just under

the groove of the foot ankle.

Lower the ankle to lock the

foot in place.

(1) Red button

(2) Groove

(3) Pin

To Remove and Attach

the Press er Foot Ankle

1. To Remove

Remove the thumb screw by turn

ing the screw counterclockwise with

the screwdriver.

(1) Thumb screw

2. To Attach

Match the hole in foot ankle with

the threaded hole in the presser bar. Fit

the thumb screw into the hole Tighten

the screw by turning it clock wise.

To Remove and Attach

the Press er Foot

1

How do I set my machine to zigzag
My machine only makes small stitches even when I change the length Submitted on 5-3-2022 at 21:36
Reply Report abuse
I can not replace a new needle. Difficult to find entrance Submitted on 19-2-2022 at 22:45
Reply Report abuse
The machine started bunching all the cotton on the underside of the material and would not progress. In the manual it suggests that lint might have collected, it had, so I cleaned this out thoroughly. I read troubleshooting in the manual and it mentioned the position of the feed teeth and the lever to the back and below the free arm bed, I slid this across and the teeth dropped but would not rise when I slid it back to the "raise feed teeth" position. It had no effect so now cannot use the machine. Can one repair this, if so, how? Thank you. Submitted on 8-12-2021 at 13:25
Reply Report abuse
the reverse is not working, am i missing a setting?
Submitted on 20-4-2020 at 06:58
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Husqvarna Huskystar 224 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskystar 224 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info