510458
18
Zoom out
Zoom in
Previous page
1/28
Next page
18
Flatlock sewing
A Flatlock Stitch is made by adjusting the tension of the 2- or
3-thread overlock stitch, sewing the seam and pulling the fabric
apart to Á atten the seam. The tensions must be adjusted correctly
for the fabric to pull Á at.
The Flatlock Stitch can be used both as a decorative construction
stitch, sewing two pieces together (Standard Flatlock Stitch),
or for ornamentation only on one piece of fabric (Ornamental
Flatlock Stitch).
There are two ways to sew a Flatlock Stitch. Either with the
wrong sides of the fabric together to create a decorative look, or
with the right sides together, to create a Ladder Stitch.
Standard Flatlock Stitch
1. Use the left needle.
2. For 2-thread Flatlock: Attach the 2-thread converter (see page
8). Thread the lower looper and the left needle.
For 3-thread Flatlock: Thread the lower and upper looper and
the left needle.
3. Set the thread tension according to the stitch table on pages
23-26.
4. Place the wrong sides of the two pieces of fabric together to
sew a decorative stitch on the right side of the garment.
5. Sew the seam, trimming the excess fabric. The needle thread
will form a V on the underside of the fabric. The lower
looper thread will pull into a straight line at the fabric edge.
6. Unfold the fabric and pull on opposite sides of the seam to
pull the stitches Á at.
Ornamental Á atlock stitch
1. Place the movable upper cutter in the nonworking position.
The fabric should not be trimmed on this stitch.
2. Follow steps 1-3 above.
3. Fold the fabric piece, wrong sides together, to sew a
decorative stitch on the right side of the garment.
4. Position the fabric so the seam is sewn with part of the stitch
extending off the fabric.
5. Unfold the fabric and pull on opposite sides of the stitch to
Á atten.
Tip: The upper looper thread is the prominent thread in the
Á atlock stitch. Place a decorative thread in the upper looper and
regular threads in the lower looper and needle.
Ladder stitch
To create a ladder stitch, sew with right sides of the fabric
together. The needle thread will be the prominent thread that
creates the ladder.
2-thread Á atlock stitch 3-thread Á atlock stitch
2-thread ladder stitch
Standard Á atlock stitch Ornamental Á atlock stitch
3-thread ladder stitch
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna HUSKYLOCK s15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna HUSKYLOCK s15 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna HUSKYLOCK s15

Husqvarna HUSKYLOCK s15 User Manual - German - 28 pages

Husqvarna HUSKYLOCK s15 User Manual - Dutch - 28 pages

Husqvarna HUSKYLOCK s15 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info