518057
13
Zoom out
Zoom in
Previous page
1/52
Next page
–11–
B
A
—7—
Stitch À nger lever
(Convert from overlock stitch to rolled edge)
Raise the needle to its highest position by turn-
ing the handwheel toward you.
Overlock
Push the stitch À nger lever to align it with “N” on
the stitch plate.
Rolled edge
Pull the stitch À nger lever toward you to align it
with “R” on the stitch plate.
Presser foot lift
Lift up the presser foot lift to raise the presser
foot. The presser foot lift stops at position
“A”. When replacing the presser foot or when
in sert ing very thick fabrics under the presser
foot, the lift height can be increased by pushing
the presser foot lift to position “B” and holding it
there. Make sure that the upper looper is in its
lowest position.
Note: Never sew with the presser foot up.
Disengaging the upper cutter
To sew along the edge of the fabric, the upper
cutter can be disengaged.
1. Remove the Á at bed cover
a and the free arm
cover
b pulling the respective cover in the
direction of the arrow.
2. Open the front cover.
3. Push the knob to its maximum point and turn
the knob to lower according to the arrow.
Since the cutter is sharp, be careful when
dis en gag ing it.
4. Be sure to put the cutter fully down before
sewing.
Note: You must sew along the edge of the fab-
ric when the cutter is disengaged!
Free arm
Pull out the Á at bed cover
a in the direction of
the arrow. The free arm is convenient for sew-
ing trousers legs, cuffs, and other small areas
such as children’s garments.
How to remove the free arm:
Hold the free arm cover
b as shown in the
picture.
1. Lift it up to release the clamps.
2. Pull it to the left.
Stitch À nger
lever
Presser foot
Stitch plate
Presser
foot lift
Front cover
a
b
13


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-huskylock-910

Reset search

  • Do you know if husqvarna Viking husky lock model number 910 is this model a cover stitch and A surger or just a cover stitch Submitted on 11-5-2021 at 17:28

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Huskylock 910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskylock 910 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Huskylock 910

Husqvarna Huskylock 910 User Manual - German - 56 pages

Husqvarna Huskylock 910 User Manual - Dutch - 56 pages

Husqvarna Huskylock 910 User Manual - French - 56 pages

Husqvarna Huskylock 910 User Manual - Spanish - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info