Manual Husqvarna Huskylock 910 (page 11 of 52) (English)

518057

Zoom out

Zoom in

1/52

–9–

—5—

1-4. Sewing speed

The harder you press the foot control, the faster

the machine will run. You can choose between

two sewing speeds with the speed selector.

:0-1000 (max. speed 1000 stitches/min)

:0-1300 (max. speed 1300 stitches/min)

1-5. Telescopic thread stand

EXtend the telescopic thread stand to its full

length and turn it until it locks against the stop.

Make sure the round loop is to the left.

Left Needle

Clamp Screw

Speed selector

1-6. Replacing the needle

Disconnect the machine before replacing the

needles.

1. Raise needle to its highest position by turn-

ing handwheel toward you.

2. When replacing right needle, loosen right

needle clamp screw with the allen wrench

and remove the needle. When replacing left

needle, loosen left needle clamp screw and

remove needle.

3. Insert the new needle fully into the groove of

the needle bar with its Á at side to the back

and tighten the screw.

Right Needle

Clamp Screw

Tighten

Loosen

Flat Side

Use needle system 130/705H numbers 80-90.

They are the same as for ordinary sewing ma-

chine.

Do you know if husqvarna Viking husky lock model number 910 is this model a cover stitch and A surger or just a cover stitch Submitted on 11-5-2021 at 17:28
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskylock 910 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Huskylock 910

Husqvarna Huskylock 910 User Manual - German - 56 pages

Husqvarna Huskylock 910 User Manual - Dutch - 56 pages

Husqvarna Huskylock 910 User Manual - French - 56 pages

Husqvarna Huskylock 910 User Manual - Spanish - 54 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna Huskylock 910 Manual

Product: