610254
22
Zoom out
Zoom in
Previous page
1/36
Next page
Huskylock 9022
6 mm (0.24")
4 mm (0.16")
Front side
Derecho
2) Sacando la aguja derecha.
La puntada overlock de tres hilos con la
aguja izquierda tendrá 6 mm de anchura.
1) Sacando la aguja izquierda
La puntada overlock de tres hilos con la
aguja derecha tendrá 4 mm de anchura.
1) By removing the left needle:
3-thread overlock stitch with the right
needle gives a stitch of 4 mm (0.16")
width.
2) By removing the right needle:
3-thread overlock stitch with the left nee-
dle gives a stitch of 6 mm (0.24") width.
This machine is a 3/4 thread convertible
overlock.
Remove either the right or left needle.
Your machine is now ready for use as a 3-
thread overlock. (Refer to "Changing the
needle")
La máquina está hecha para un overlock
de tres- o cuatro hilos.
Para la costura overlock de tres hilos,
saque una aguja. (Véase ”Cambiar aguja”)
Puntada Overlock de tres hilos con una aguja
Three thread narrow and wide overlock stitsh /
Adjust to a narrower cutting
width / Disminuir el ancho de
corte
Adjust to a wider cutting width
/ Aumentar el ancho de corte
Front side
Derecho
Curl
Rizado
Front side
Derecho
Thread loops off the
edge of fabric
Lazo
Hexagon wrench key
Llave de encastre
Back side
Revés
Front side
Derecho
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Huskylock 90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskylock 90 in the language / languages: English, Spanish as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info