518052
44
Zoom out
Zoom in
Previous page
1/64
Next page
~ 42 ~
1
2
A
5
6
Hoop adjustment screw
5. HOOP THE FABRIC
Two hoops are supplied with the machine - one large
(260x160mm) and one small (100x100mm).
For the best embroidery results, place a layer of stabilizer
beneath the fabric. When hooping stabilizer and fabric make
sure that they are smooth and securely hooped.
1. Loosen the hoop adjustment screw on the outer hoop
and remove the inner hoop. Place the outer hoop on a
À rm Á at surface.
Place the stabilizer and fabric, with the right sides facing
up, on top of the outer hoop. Place the inner hoop on
top of the fabric. Push the inner hoop À rmly into the
outer hoop.
2. Adjust the pressure of the outer hoop by turning the
hoop adjustment screw.
Tighten the hoop adjustment screw, but do not overly
tighten it.
The fabric should be taut in the hoop for the best
results. Do not stretch the fabric in the hoop, it can
cause distortion to the embroidery.
6. ATTACH AND REMOVE THE
EMBROIDERY HOOP
1. Raise the presser foot and needle, and push up lever
(A) of embroidery foot with your À nger and pass
embroidery hoop under it.
To remove, pull the hoop forward to slide it out from
underneath the embroidery foot.
2. Slide the hoop connector into the hoop attachment on
the embroidery arm until it clicks into place.
To remove the hoop from the embroidery arm, press the
release lever and slide the hoop towards you.
Hoop connector
Hoop release lever
Embroidery arm
Hoop attachment
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna H Class 600E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H Class 600E in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna H Class 600E

Husqvarna H Class 600E User Manual - German - 64 pages

Husqvarna H Class 600E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info