477589
20
Zoom out
Zoom in
Previous page
1/96
Next page
20
2
A. MOWER SIDE SUSPENSION
ARMS
B. RETAINER SPRING
C. REAR LIFT LINK(S)
D. RIGHT SIDE REAR MOWER
BRACKET
E. FRONT LIFT LINK ASSEMBLY
F. FRONT SUSPENSION BRACKET
H. FRONT MOWER BRACKET
I. LEFT SIDE REAR MOWER
BRACKET
K. BELT TENSION ROD
L. LOCKING BRACKET
M. ENGINE CLUTCH PULLEY
Q. DEFLECTOR SHIELD
S. ANTI-SWAY BAR
W. FRONT GAUGE WHEEL
TO INSTALL MOWER
1. Set parking brake lever (P) and lower attachment
lift lever (N).
Depress clutch/brake pedal all the way down and hold.
• Pull parking brake lever (P) up and hold, re lease pres sure
from clutch/brake pedal, then release parking brake lever.
Pedal should re main in brake position. Make sure parking
brake will hold tractor secure.
P
P. Parking Brake Lever
N
N. Lift Lever
CAUTION: Lift lever (N) is spring loaded. Have a tight
grip on lift lever, lower it slowly and engage in lowest
position. Lift lever is located on left side of fender.
2. Assemble front gauge wheel (W) to front of mower.
3. Turn steering wheel left and position mower.
Turn steering wheel to the left as far as it will go and position
mower on right side of tractor with deflector shield (Q) to the right.
4. Slide mower under tractor.
Bring belt forward and check belt for proper routing in all
mower pulley grooves.
NOTE: Be sure mower side suspension arms (A) are pointing
forward before sliding mower under tractor.
Slide mower under tractor until it is centered under tractor.
Y
Z
W
H
X
H. Front Mower
Bracket
W. Front Gauge
Wheel
X. Shoulder Bolt
Y. 1¼ O.D.
Washer
Z. 3/8-16 Locknut
02965
Front
Back
Engine
Transaxle
Q. Deflector Shield
Q
02965
A. Mower Side
Suspension Arms
Q. Deflector Shield
Q
A
5. Install anti-sway bar (S) (If equipped)
90° End. Integrated Washer End
Anti-Sway Bar (S)
Towards Transaxle. Towards Mower Deck
From right side of mower, first insert 90° end of anti-sway bar
(S) into hole in transaxle bracket (T), located near left rear
tire in front of transaxle.
NOTE: Flashlight may be helpful.
E
A
M
F
B
K
C
C
S
W
H
I
D
L
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna GTH264T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna GTH264T in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info