477589
21
Zoom out
Zoom in
Previous page
1/96
Next page
21
2
S
D
T
D. Right Side Rear
Mower Bracket
S. Anti-Sway Bar
T. Transaxle Bracket
NOTE: Depending on model, bracket (T) may be different than
shown but hole for anti-sway bar will be in same position/location.
Pivot the integrated washer end of anti-sway bar (S) towards
mower deck bracket on right side of mower. Insert integrated
washer end of bar into hole in rear mower bracket (D). Move
mower as needed to insert integrated washer end of bar into
rear mower bracket (D).
Secure with small washer and small retainer spring as shown.
Anti-Sway Bar
(S) Location
Transaxle
Bracket (T)
Located Between
Rear Tires
Place 90° End Into Hole
Place 90° End Into Hole
S
T
S. Anti-Sway Bar
T. Transaxle Bracket
7. Attach rear lift links (C)
Insert rod end of rear lift link (C) into hole (U) in tractor lift
shaft suspension arm and pivot link down to mower.
Lift rear corner of mower and position slot in link assembly
over pin on rear mower bracket (D) and secure with large
washer and large retainer spring.
Repeat on opposite side of tractor.
6. Attach mower side suspension arms (A) to chassis.
Position front hole in side suspension arm (A) over pin on
outside of tractor chassis and secure with large washer and
large retainer spring (B).
Repeat on opposite side of tractor.
Engage belt tension rod (K) on locking bracket (L).
CAUTION: Belt tension rod is spring loaded. Have a tight
grip on rod and engage slowly.
Raise attachment lift lever to highest position.
If necessary, adjust gauge wheels before op er at ing mower
as shown in the owner's/operator's manual. Check gauge
wheels, deck level and rake settings.
9. Install Belt On Engine Clutch Pulley (M)
Disengage belt tension rod (K) from locking bracket (L).
Install belt onto engine clutch pulley (M).
IMPORTANT: Check belt for proper routing in all mower pulley
grooves and under mandrel covers.
B
D
A
A. Mower
Side
Suspension
Arms
B. Retainer
Spring
D. Right
Side Rear
Mower
Bracket
Front Link
Location
E. Front Lift Link
Assembly
F. Front Suspension
Bracket
G. Large Retainer
Spring
H. Front Mower Bracket
J. Small Retainer
Spring
M. Engine Clutch Pulley
J
E
G
F
M
H
U
D
C
C. Rear Lift Link(S)
D. Right Side Rear
Mower Bracket
U. Hole
M. Engine
Clutch Pulley
M
8. Attach front link (E)
Turn steering wheel to position wheels straight forward.
From front of tractor, insert rod end of front link (E) through
front hole in tractor front suspension bracket (F).
Move to left side of mower and and insert large retainer spring
(G) through hole in front link (E) behind front suspension
bracket (F).
Insert other end of link (E) into hole in front mower bracket
(H) and secure with washer and small retainer spring (J).
NOTE: Requires deck lifting.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna GTH264T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna GTH264T in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info