518048
42
Zoom out
Zoom in
Previous page
1/48
Next page
40
GATHERING
Turn off the main switch.
1. Snap on the gathering foot. Switch on the
sewing machine.
2. If you are only using one piece of fabric,
place it under the presser foot and sew a
straight stitch. The fabric will gather.
3. If you are using two pieces of fabric place
one piece under the presser foot and the other
piece of fabric in between the cut in the foot
(see picture).
4. Start sewing. The bottom layer of fabric will
gather while the top layer stays at.
DUAL FEED FOOT
The dual feed presser foot is designed to feed
layers of fabric and/or batting evenly. Perfect
for quilting, sewing velvet, some stretch fabrics,
imitation leathers and fabrics which need careful
pattern matching. It also helps to prevent uneven
feeding of very dif cult fabrics.
1. Remove the presser foot ankle by unscrewing
the ankle screw.
2. Place the dual feed on your machine from the
back, positioning the lever over the needle
clamp screw (A). Then screw the dual feed
onto the presser foot bar with the black screw
found together with the dual feed foot (B).
3. Make sure both the needle screw (A) and the
attaching screw (B) are tightly secured.
Reduce presser foot pressure to 3.
How to Attach the Guide
The two guides included with the dual feed will
help you sew parallel rows of stitching side by
side as in channel quilting or tucking. There is one
guide for the left side, and one for the right.
Place the guide into the slot on the back of
the dual feed foot (C) and push it down.
Adjust the space between the foot and the
guide by pulling it to the left or to the right.
A
B
C
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Emerald 203 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Emerald 203 in the language / languages: English as an attachment in your email.

The manual is 8,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Emerald 203

Husqvarna Emerald 203 User Manual - German - 48 pages

Husqvarna Emerald 203 User Manual - Dutch - 48 pages

Husqvarna Emerald 203 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info