518048
40
Zoom out
Zoom in
Previous page
1/48
Next page
38
Corded Buttonhole (StretchFabrics)
When sewing buttonholes in stretch fabrics we recom-
mend cording the buttonhole to increase the stability
and to keep the buttonhole from stretching out.
1. Loop a piece of heavy thread or perle cotton over
the nger at the back of the Buttonhole Slider
Foot C.
2. Stitch a buttonhole. Do not hold back the cord.
The satin buttonhole columns will stitch over the
cord.
3. When the buttonhole is nished, lift the cord off
the nger and pull out the slack.
4. Cross the cord in front of the needle and thread
cord ends into a large needle, pull to the wrong
side and knot ends before cutting excess.
5. Use the seam ripper to carefully open the
buttonhole.
SEWING ON BUTTONS
Sew buttons, snaps, hook and eyes quickly with your
sewing machine. Use the multipurpose tool to create a
thread shank.
1. Select sew-on-button stitch 1:09.
2. Snap off the presser foot and lower the feed teeth.
3. Place the fabric, multipurpose tool and button under
the ankle with the holes in the button lined up with
the swing of the needle. Check the swing of the
needle by turning the handwheel and making sure
that the needle does not hit the button.
Note: The recommended width of 3.0 is set for most buttons. If
you sew a tiny button or a very large coat button, decrease (–) or
increase (+) the stitch width until the swing of the needle sews in
the holes of the button or snap.
4. Press the foot control. The sewing machine will
sew the button in place, make a x and then stop.
5. Raise feed teeth and remove the fabric.
Note: Place the thin end of the clearance plate under the button
when sewing on light fabrics. Use the thick end for heavier
fabrics. Hold in place on the fabric with transparent tape.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Emerald 203 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Emerald 203 in the language / languages: English as an attachment in your email.

The manual is 8,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Emerald 203

Husqvarna Emerald 203 User Manual - German - 48 pages

Husqvarna Emerald 203 User Manual - Dutch - 48 pages

Husqvarna Emerald 203 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info