609685
96
Zoom out
Zoom in
Previous page
1/104
Next page
10:4
Is the bobbin wound correctly? Wind a new bobbin.
Are you using the correct bobbin? Use only the original bobbins for this model
The Machine Skips Stitches
Is the needle bent or blunt? Insert a new needle.
Did you insert the needle properly? Insert needle correctly as described in chapter 2.
Did you insert a wrong needle? Use needle system 130/705 H.
Did you thread the machine properly? Check how the machine is threaded.
Is the correct presser foot used? Attach correct presser foot.
Is the needle too small for the thread? Change the needle.
Is the fabric moving up and down with the
needle when free motion sewing?
Reduce the presser foot height by touching the Free Motion icon and reducing
the presser foot height.
The Seam has uneven Stitches
Is the thread tension correct? Check needle thread tension and the threading.
Are you using too thick or slubbed thread? Change the thread.
Is the bobbin thread evenly wound? Check bobbin winding (see page 2:8).
Is a correct needle used? Insert a proper needle correctly as described in chapter 2.
The Machine does not Feed or Feeds Irregularly
Did you thread the machine properly? Check how the machine is threaded and rethread the machine (see page 2:5).
Has sewing lint collected between the feed teeth? Remove the needle plate and clean the feed teeth with a brush.
Thread loops are forming on the underside of the embroidery design
Has the embroidery built up too much to
move freely under the presser foot?
Reduce the presser foot height in Embroidery Settings in SET menu in small
steps until problem is solved.
The Embroidery Design is Distorted
Is the fabric hooped properly? The fabric must be tightly hooped.
Is the inner embroidery hoop completely inserted
in the outer embroidery hoop?
Hoop the fabric in such a way that the inner hoop exactly matches the outer hoop.
Is the area around the embroidery arm free? Clear area around the embroidery unit and recalibrate.
The Embroidery Design has Puckered
Did you stabilize your fabric sufciently? Ensure you use the proper stabilizer for your technique or fabric type.
The Machine will not Embroider
Is the embroidery unit attached? Make sure that the embroidery unit is properly attached into the socket.
Is the wrong hoop attached? Slide on the correct hoop.
System report
Is your machine displaying the system report
pop-up?
When the system report pop-up appears, go to My Files/Report to locate the
le. Save the le to a USB stick. Send the le together with a short description
of what you were doing before the pop-up appeared to product.improvement@
husqvarnaviking.com. After sending the le, remove it from your machine.
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer Topaz 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer Topaz 40 in the language / languages: English as an attachment in your email.

The manual is 5,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer Topaz 40

Husqvarna Designer Topaz 40 User Manual - German - 104 pages

Husqvarna Designer Topaz 40 User Manual - Dutch - 104 pages

Husqvarna Designer Topaz 40 User Manual - French - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info