609685
95
Zoom out
Zoom in
Previous page
1/104
Next page
Maintenance 10:3
General Problems
Bobbin alarm does not work? Clean lint from bobbin area and use only the original HUSQVARNA
VIKING
®
bobbins approved for this model.
Thread cutter does not cut the thread? Remove stitch plate and clean lint from bobbin area.
Enable Selective Thread cutter Auto in the SET Menu.
Fabric does not feed? Make sure that the feed teeth are not lowered and that the embroidery unit is
not attached.
Wrong stitch, irregular or narrow stitch? Deactivate Twin Needle or Stitch Width Safety Sewing Settings in the SET Menu. Insert
a new needle.
The needle breaks? Insert needle correctly as described in chapter 2.
The machine will not sew? Check that all plugs are securely plugged into the machine and into the wall socket.
The screen displays the startup screen? Touch the touch screen to activate.
Icons on the touch screen are not activated when
touched?
Calibrate the touch screen. Calibrate is found in the SET Menu (Touch Screen Adjust).
The sewing and embroidery machine screen
and/or function buttons do not respond to
touch?
The sockets and function buttons on the machine can be sensitive to static
electricity. If the screen does not respond to touch, turn the machine
OFF and then ON again. If the problem persists, contact your authorized
HUSQVARNA VIKING
®
retailer.
Needle Thread Breaks
Did you insert the needle properly? Insert needle correctly as described in chapter 2.
Did you insert a wrong needle? Use needle system 130/705 H.
Is the needle bent or blunt? Insert a new needle.
Is the needle too small for the thread? Change the needle to the proper size for the thread.
Is the needle plate hole damaged? Change the stitch plate.
Did you thread the machine properly? Check how the machine is threaded. Rethread the machine (see page 2:5).
Are you using poor thread with slubs or
thread which has become dry?
Change to a new high quality thread purchased from an authorized
HUSQVARNA VIKING
®
retailer.
Is the correct spool cap used? Attach a spool cap of the right size for the actual thread spool (see chapter 2).
If you are using a vertical spool pin, you should not have a spool cap on top of the spool.
Is the best spool pin position used? Try a different spool pin position (vertical or horizontal).
Bobbin Thread Breaks
Did you insert the bobbin properly? Check the bobbin thread (see page 2:9).
Is the needle plate hole damaged? Change the stitch plate (see page 10:2).
Is the bobbin area full of lint? Clean lint from bobbin area and use only the original bobbins approved for
this model (see page 10:2).
TROUBLESHOOTING
In this troubleshooting guide you will nd solutions to the problems you may have with your machine. For further information
please contact your local authorized HUSQVARNA VIKING
®
retailer who will be happy to help you.
Have Your Sewing Machine Serviced Regularly by your Local Authorized Dealer!
If you have followed this troubleshooting information and still have problems, take your sewing machine to your dealer. If there
is a specic problem, it is a great help to test sew with your thread on a scrap of your sewing fabric and bring it to your dealer. A
sewing sample will often give much better information than words.
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer Topaz 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer Topaz 40 in the language / languages: English as an attachment in your email.

The manual is 5,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer Topaz 40

Husqvarna Designer Topaz 40 User Manual - German - 104 pages

Husqvarna Designer Topaz 40 User Manual - Dutch - 104 pages

Husqvarna Designer Topaz 40 User Manual - French - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info