609685
33
Zoom out
Zoom in
Previous page
1/104
Next page
3:3SettingS & Function buttonS
2
1
3 5 64
7
8
9
6. SPEED + and -
SEWING MODE: All stitches in your machine have a pre-set,
maximum sewing speed. Press Speed - or Speed + to decrease
or increase the sewing speed. When touching Speed a pop-
up message on the screen will indicate the speed setting.
You can also set the speed by touching the slider in the pop-
up message. If you change the speed setting while sewing/
embroidering no pop-up message will appear.
When sewing with metallic threads, or when sewing on
delicate fabrics, lower the speed for optimal results.
EMBROIDERY STITCH-OUT: Each stitch type in a design has a
pre-set maximum speed at which it can be sewn. To reduce
the speed when using specialty threads or embroidering on
delicate fabrics, press Speed -. To increase the speed again
press Speed +.
7. Sensor Foot Up and Extra Lift
SEWING MODE: Press Sensor Foot Up to raise the presser
foot. Press it a second time and the presser foot will raise to
Extra Lift.
EMBROIDERY STITCH-OUT: Press Sensor Foot Up and Extra
Lift to lift the presser foot to Up position. Press once more
and the presser foot will raise to Extra Lift, to make it easier to
insert or remove the hoop.
8. Sensor Foot Down and Pivot
SEWING MODE: Press the Sensor Foot Down and Pivot button
and the presser foot will be completely lowered. The machine
rmly holds the fabric. Press Sensor Foot Down again to raise
the presser foot to pivot position or a oating position over
the fabric for easier placement of the fabric.
The presser foot will be lowered automatically when you start
sewing. You can also tap the foot control to lower the presser
foot.
When you stop with the needle in the down position, the
presser foot is automatically lifted to pivot position. This
function can be turned off in the SET Menu, Sewing Settings
(see page 3:10).
EMBROIDERY STITCH-OUT: Press the Sensor Foot Down
button to lower the presser foot into the Embroidery “oat”
position.
9. Reverse
For permanent reverse, press the Reverse button once
before starting to sew. The reverse indicator will be lit and
the machine sews in reverse until you press the button again
to cancel. If you press the reverse button while sewing, the
machine will sew in reverse for as long as you keep the button
pressed. The reverse indicator is lit when the reverse button is
pressed.
Reverse is also used when sewing manual buttonholes,
bartacks, darning stitches and automatic tapering to step
between the parts of the stitch.
Reverse has no function in Embroidery Mode.
EXCLUSIVE SENSOR SYSTEM
Thanks to the EXCLUSIVE SENSOR SYSTEM
feature,
the presser foot continuously senses the thickness of fabric,
whether in sewing mode or embroidery mode, and sews over
the fabric smoothly and evenly with perfect fabric feeding.
Go to the SET Menu, to see the actual setting of the Sensor
presser foot pressure for the selected fabric and adjust the
presser foot pressure.
FUNCTION BUTTONS
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer Topaz 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer Topaz 40 in the language / languages: English as an attachment in your email.

The manual is 5,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer Topaz 40

Husqvarna Designer Topaz 40 User Manual - German - 104 pages

Husqvarna Designer Topaz 40 User Manual - Dutch - 104 pages

Husqvarna Designer Topaz 40 User Manual - French - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info