609685

Husqvarna Designer Topaz 40 Manual

32
Zoom out
Zoom in
Previous page
1/104
Next page
3:2
2
1
3 5 64
7
8
9
1. START/STOP
Press this button to start or stop the machine sewing or
embroidering when you are not using the foot control. Press
START/STOP to begin and press again to stop.
Your machine stops automatically at color changes and when
the embroidery is nished.
2. STOP (Monochrome)
SEWING MODE: STOP is used to conclude a stitch or to sew
just one unit of the stitch. Your sewing machine ties off the
thread and stops automatically when one stitch unit or stitch
program has been completed. The LED next to the button is
lit when STOP is activated. Select STOP again to cancel or by
selecting a new stitch. The STOP function is cancelled when
the stitch is completed. Press the button again if you wish to
activate it once more.
STOP is also used to repeat the darning or bartack stitch with
the same size.
The STOP function can be programmed, see page 5:3.
EMBROIDERY STITCH-OUT: When embroidering STOP is
automatically activated and the machine stops at color changes.
Deselect STOP to eliminate stops for color changes to create
monochrome embroidery (see page 8:4). The LED next to the
button is lit when STOP is activated.
3. FIX (Baste)
SEWING MODE: FIX is used to tie off a stitch. FIX is
automatically activated when you select a stitch, use the
Selective Thread Cutter, or use STOP while you are sewing.
At the beginning, your machine sews a few tie-off stitches
and continues with the selected stitch. Press FIX while sewing
and your machine sews a few tie-off stitches and stops
automatically. The LED next to the button is lit when FIX is
active. Press the FIX button to turn the function off. The FIX
function can be programmed, see page 5:3.
Note: FIX Auto can be cancelled in the SET Menu, Sewing Settings
(see page 3:10). No automatic FIX stitches will be sewn unless you use
the FIX button on your machine.
EMBROIDERY STITCH-OUT: Press FIX to baste an outline
of the embroidery design area or to baste the fabric to the
stabilizer.
4. Selective Thread Cutter
SEWING MODE: Press the Selective Thread Cutter button and
your machine ties off the threads, cuts the top and bobbin
threads, raises the presser foot and the needle, and activates the
FIX function for the next start. To cut threads at the end of
a stitch or stitch program, press Selective Thread Cutter while
sewing. The LED next to the button starts ashing indicating
that a cut is requested. When the stitch or stitch program is
completed, the machine will make a FIX and then cut the upper
thread and bobbin thread. The Selective Thread Cutter function
can be programmed, see page 5:3.
Note: Your machine cuts the threads automatically after certain stitches
such as completing a Sensor One Step Buttonhole. Selective Thread
Cutter Auto can be cancelled in the SET Menu, Sewing Settings (see
page 3:10).
EMBROIDERY STITCH-OUT: If you press the Selective Thread
Cutter it automatically cuts the top and bobbin threads and
raises the presser foot. At the end of a color block only the
top thread is cut. When the design is nished, both top and
bobbin threads are cut automatically.
Note: Selective Thread Cutter Auto can be cancelled in the SET Menu,
see page 3:10.
5. Needle Stop Up/Down (Trim Position)
SEWING MODE: Press the Needle Stop Up/Down to move the
needle up or down. The setting of the needle stop position
is changed at the same time. When Needle Stop Down is
selected, a needle icon with an arrow pointing down is shown
on the Color Touch Screen.
You can also tap the foot control to raise or lower the needle.
If both the needle and the presser foot are in up position, only
the presser foot will be lowered when you tap the foot control
the rst time. Tap again to lower the needle as well.
EMBROIDERY STITCH-OUT: The machine will move the hoop
forward, towards you, for easy thread trimming.
FUNCTION BUTTONS
(Embroidery Mode functions are in brackets)
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer Topaz 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer Topaz 40 in the language / languages: English as an attachment in your email.

The manual is 5,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer Topaz 40

Husqvarna Designer Topaz 40 User Manual - German - 104 pages

Husqvarna Designer Topaz 40 User Manual - Dutch - 104 pages

Husqvarna Designer Topaz 40 User Manual - French - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info