609909
17
Zoom out
Zoom in
Previous page
1/100
Next page
1-17
Set it Up
Start/Stop
Touch this button to run and stop the machine
without the foot control. Touch START/STOP to
begin and touch again to stop sewing.
Reverse
Hold button in to sew in reverse. The button
lights up. Designer SE sews forward when the
button is released and the light goes out. For
permanent reverse, touch the button twice in
quick succession before starting to sew. The
button will be lit and the Designer SE sews
in reverse until you touch the button again
to cancel. The longest reverse stitch length is
3 mm.
Reverse is also used when sewing buttonholes,
darning stitches and tapered satin stitches to step
between the parts of the stitch.
For the 4-way stitches in the S-menu, reverse
rotates the sewing direction of the stitch 90
degrees for each touch (see page 2-8).
Exclusive
Sensor System
Thanks to the Sensor Foot Pressure, the presser
foot actually senses the thickness of fabric,
embroidery or stitching to sew over it smoothly
and evenly with perfect, even fabric feed.
To see the actual setting of the pres ser foot
pressure for the selected fabric and adjust the
presser foot pressure, go to the Set Menu (see
page 1-28).
Sensor Foot Up and Extra Lift
Raises the pres ser foot and the needle to up
po si tion. Touch the button once more and the
pres ser foot will raise to ex tra lift, and the feed
teeth will be lowered, to make it easy to get
thick fabric under the pres ser foot.
Sensor Foot Pivot
Touch this button to simplify placing the fabric.
The pres ser foot will be lowered to pivot
po si tion or a fl oating position over fabric.
When you stop with the needle in the down
position, the pres ser foot is automatically lifted
to pivot position.
Sensor Foot Down
Touch this button and the pres ser foot will be
completely lowered while the Designer SE is
rmly holding the fabric.
When the embroidery unit is attached, the
presser foot is lowered into the embroidery
“fl oat” position.
The presser foot is lowered automatically when
you start sewing.
DSE 05 Kap 1.indd 1-17 05-03-14 11.07.29
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer SE in the language / languages: English as an attachment in your email.

The manual is 6,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer SE

Husqvarna Designer SE User Manual - German - 100 pages

Husqvarna Designer SE User Manual - Dutch - 100 pages

Husqvarna Designer SE User Manual - French - 100 pages

Husqvarna Designer SE User Manual - Spanish - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info