609909
16
Zoom out
Zoom in
Previous page
1/100
Next page
1-16
Set it Up
Function Buttons
Stitch Re-start
When having stopped sewing in the middle
of a stitch, touch Re-start to start sewing at the
beginning of the stitch again without having to
re-set any special settings you have made.
IN EMBROIDERY MODE: Used for easy bobbin access,
see page 3-7.
STOP
STOP is used to conclude a stitch. Your Designer SE
xes the thread and stops automatically when
one stitch or stitch program has been completed.
The button lights up when you touch it. STOP is
cancelled when you touch the button again or
by selecting a new stitch. The button light will
go out. The STOP function can be programmed,
see page 2-14.
IN EMBROIDERY MODE: Used for one color embroidery,
see page 3-7.
Fix
FIX is used to tie off a stitch and is automatically
activated when a stitch is selected or when the
Selective Thread Cutter has been used. At the
beginning, your Designer SE sews a few tie-off
stitches and goes on with the selected stitch. Touch
FIX while sewing – Designer SE sews a few tie-off
stitches and stops automatically. The button lights
up when the FIX function is active. By touching
the lit button the function can be turned off. The
FIX function can be programmed (see page 2-14).
IN EMBROIDERY MODE: Touch to baste an outline of the
embroidery area (see page 3-7).
NOTE: Automatic FIX can be cancelled in the Set
Menu (see page 1-25).
Selective Thread Cutter
Touch the button and your Designer SE cuts the
top and bobbin threads, raises the presser foot
and the needle, and activates the FIX function. To
cut before the needle moves to the start position
of next stitch, touch Selective Thread Cutter while
sewing. The button starts fl ashing, indicating that
a cut is requested. The Selective Thread Cutter
function can be programmed, see page 2-14.
NOTE: Designer SE cuts automatically after Sensor
buttonhole stitches. Automatic Selective Thread
Cutter can be cancelled in the Set Menu, see page
1-25.
IN EMBROIDERY MODE: Cuts top and bobbin threads and
raises presser foot. Top thread only is cut automatically
at the color change. When the design is fi nished both
top and bobbin threads are cut automatically.
Needle Stop Up/Down
Touch this button to move the needle down or
up. The set ting of the needle stop po si tion is
changed at the same time. The set needle stop
position is indicated by an up or down arrow
next to the needle recommendation on screen.
You can also tap the foot control to raise or
lower needle.
IN EMBROIDERY MODE: Used for park position and easy
thread trims (see page 3-8).
Speed
Touch
+ SPEED or − SPEED to increase or
decrease the sewing speed. Touch when not
sewing and a pop-up window on the screen
indicates the speed set ting. You can also set the
speed by touching the slider in the pop-up. You
can change the speed set ting while sewing but no
pop-up will appear. All stitches in your Designer SE
have a pre-set, recommended sewing speed. When
you select a stitch, your Designer SE automatically
sets the best sewing speed for that stitch.
DSE 05 Kap 1.indd 1-16 05-03-14 10.56.54
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer SE in the language / languages: English as an attachment in your email.

The manual is 6,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer SE

Husqvarna Designer SE User Manual - German - 100 pages

Husqvarna Designer SE User Manual - Dutch - 100 pages

Husqvarna Designer SE User Manual - French - 100 pages

Husqvarna Designer SE User Manual - Spanish - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info