Manual Husqvarna Designer SE - Limited Edition (page 51 of 100) (English)

609910

Zoom out

Zoom in

1/100

3-5

Set to Embroider

Embroidery Template

Because the embroidery designs are pic tured actual

size in the booklet, it is easy to place the embroidery in

the desired position on your garment or project.

1. Place the template over the picture of the selected

design in the booklet.

2. Use the template pencil to trace the outline of the

design onto the template.

3. Use the template to position the design on the

project to be em broi dered. Through cut outs on

the template, mark the center point, the sides and

the top and bottom of the embroidery area on the

project with the Pictogram Pen™.

4. When hooping the fabric (see previous page),

place the fabric and the inner hoop so that the

markings on the fabric match the markings on the

inner hoop.

Take the time to be sure the marks are all aligned.

5. Push the inner hoop into the outer hoop and

tighten the screw with the Screw Grip.

Slide on the Hoop

Slide the hoop onto the em broi dery arm until it clicks

into place.

The marked center point on the design should match

the starting point of the needle. If minor adjustment

is needed, touch the positioning buttons

(see

page 4-6).

NOTE: To remove the hoop from the embroidery arm, press

the grey button on the hoop attachment and slide the hoop

toward you.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer SE - Limited Edition in the language / languages: English as an attachment in your email.

The manual is 6,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer SE - Limited Edition

Husqvarna Designer SE - Limited Edition User Manual - German - 100 pages

Husqvarna Designer SE - Limited Edition User Manual - Dutch - 100 pages

Husqvarna Designer SE - Limited Edition User Manual - French - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna Designer SE - Limited Edition Manual

Product: