Manual Husqvarna Designer SE - Limited Edition (page 50 of 100) (English)

609910

Zoom out

Zoom in

1/100

3-4

Set to Embroider

Remove the Embroidery Unit

1. To store the embroidery unit in the embroidery case,

touch

. The embroidery arm will move to the

park po si tion.

under the Embroidery Color Control tab,

, has the same function (see page 4- 8).

2. Press the button at the left under side of the unit

and slide the unit to the left to remove it.

3. Close the cover on the socket.

Hoop the Fabric

1. Loosen the screw on the larger outer hoop.

Remove the inner hoop. Place the hoop on a À rm

Á at surface with the screw on the lower right.

There is a small arrow in the center of the lower

edge of the hoop which will line up with a small

arrow on the inner hoop.

2. Place stabilizer and the fabric on top of the outer

hoop and place the inner hoop on top of the

fabric with the small arrow at the bottom edge.

3. Push the inner hoop À rmly into the outer hoop.

NOTE: Be sure to loosen the hoop screw enough for the

fabric and stabilizer thickness so you can easily push the

inner hoop in place. Push in on the sides of the large hoop

to be sure both hoops are even.

4. Tighten the hoop screw. The fabric should be taut

in the hoop for the best results. Do not pull on the

fabric as this can stretch it and distort your design.

Use the Screw Grip to tighten the hoop screw if

needed. Do not over tighten.

NOTE: Read more about Stabilizers and Hoops in the

Accessory User’s Guide.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer SE - Limited Edition in the language / languages: English as an attachment in your email.

The manual is 6,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer SE - Limited Edition

Husqvarna Designer SE - Limited Edition User Manual - German - 100 pages

Husqvarna Designer SE - Limited Edition User Manual - Dutch - 100 pages

Husqvarna Designer SE - Limited Edition User Manual - French - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna Designer SE - Limited Edition Manual

Product: