609769
70
Zoom out
Zoom in
Previous page
1/84
Next page
Embroidery Functions
One-Color Embroidery (Monochrome)
Press STOP (1) to cancel the color stops if you want to sew a
design in one color only.
Basting
Press the FIX button (2) and the machine will add a basting
stitch around the design area. Basting enables you to secure
your fabric to the stabilizer placed beneath. It is especially
useful when the fabric to be embroidered cannot be hooped.
Basting provides support for stretchy fabric and also shows
where the design will be placed on the fabric.
Park Position/Trim Position
Remove the hoop and press the needle stop up/down button
(3) to put the embroidery unit in park position for easy
storage.
Press the needle stop up/down button when the hoop is
attached and the hoop moves towards you, making it easy to
trim fabric when embroidering an appliqué. Cut the fabrics
and press the button again. The hoop moves back to the
current stitch. Press start/stop to resume the embroidery.
Note: The hoop options menu will open to show the actual position.
Corner Check
Corner check can be used to trace the four corners of the
design. Press the corner check button (4). Each time you
press the button the hoop will move to one of the corners in
the following order: upper left, upper right, lower right and
lower left. On the fifth press the hoop will move to the
center position of the design and on the sixth press back to
the current stitch position. A crosshair will indicate the
current needle position on the graphic display.
The corner check function also shows where the design will
be embroidered on the fabric. This makes it easier to position
designs when embroidering several designs in succession.
Step Stitch by Stitch
Use the step stitch by stitch and + buttons (5) to step
through the design stitch by stitch. If the top or bobbin
thread runs out or is broken, step backwards a few stitches
before starting to embroider again. Current stitch number is
shown on the graphic display in the stitch-out view.
70 7 Embroidery Mode
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna DESIGNER JADE 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna DESIGNER JADE 35 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna DESIGNER JADE 35

Husqvarna DESIGNER JADE 35 User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info