609769
69
Zoom out
Zoom in
Previous page
1/84
Next page
Mirror End to End
Press the mirror end to end button (D) to mirror the loaded
design end to end. An icon is shown on the graphic display
indicating that mirror end to end is selected.
Hoop Options
Press the hoop options button (A) to open a list of hoop
options. Use the up/down arrow buttons to make a selection
and confirm by pressing the OK button. Close the hoop
options menu by pressing the hoop options button again or
select the current stitch position.
Hoop Size
When a design is loaded to the embroidery area the smallest
hoop that fits the design is automatically selected.
Use the right arrow button to open a list of available hoop
sizes, including hoops that are available to purchase from
your authorized retailer. Depending on the size of the design,
some hoops may not be available for selection.
Use the up and down arrow buttons to select a different
hoop and confirm your selection by pressing the OK button.
Note: If you start embroidering and the hoop you have selected is not the
same as the hoop attached to the embroidery unit, a pop-up message will
appear to inform you. Attach the correct hoop or select another hoop in
the list.
Current Stitch
If you have selected one of the hoop positions and want to
return to the current stitch and start embroidering where the
embroidery was interrupted, select current stitch. You can
also press the start/stop button once to return to current
stitch and start to embroider.
Park Position
When you have finished your embroidery, remove the hoop
and select park position. The embroidery arm will be placed
in the position for storing your embroidery unit.
Note: It is very important that the hoop is removed, otherwise the hoop,
needle or presser foot may be damaged.
Trim Position
Trim position will move the hoop towards you, making it
easier to trim fabric when embroidering an appliqué.
Center Position
Use the center position if you want to check where the center
position of the hoop will be placed on the fabric.
7 Embroidery Mode 69
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna DESIGNER JADE 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna DESIGNER JADE 35 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna DESIGNER JADE 35

Husqvarna DESIGNER JADE 35 User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info