609769
43
Zoom out
Zoom in
Previous page
1/84
Next page
Adjust a Single Stitch or Letter
To adjust the settings of a single stitch in a program you must
select the stitch in programming mode. You can adjust the
stitch width, stitch length, density, needle position or mirror
the stitch. The settings for the selected stitch are shown on
the graphic display. Press the alternate view button to toggle
between different settings.
Adjust the Entire Stitch Program
Adjustments that affect the whole program and not just
single stitches, are done in sewing mode. Press the program
mode button, Start/Stop button or step on the foot control
to leave programming mode and switch to sewing mode. In
sewing mode you can adjust the width and length or mirror
the whole program.
There are a few things you need to know when adjusting the
stitch program in sewing mode:
The adjustments you make to the program in sewing mode
can be saved in the machine memory. However, these
adjustments cannot be brought back to programming mode.
If you have made adjustments in sewing mode and press the
program mode button to go back to programming mode,
these adjustments will be cancelled. This will also happen if
you load a saved program from the machine memory to
programming mode.
Sew out the Stitch Program
Sewing mode
When you are done with your program press the save button
to save it or, if still in programming mode, press the program
mode button, start/stop button or step on the foot control
to switch to sewing mode.
Once you are in sewing mode and step on the foot control
the machine will sew out your stitch program. The program
will be sewn continuously if no STOP is programmed. Press
the STOP button to sew your stitch program only once.
It is possible to start sewing at any stitch in the program. Use
the left/right arrow buttons to step through the program in
sewing mode.
Machine Memory
You can save and recall your program or favorite stitch with
personal settings in the machine memory.
The memory has a maximum space of 60 stitches.
4 Program 43
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna DESIGNER JADE 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna DESIGNER JADE 35 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna DESIGNER JADE 35

Husqvarna DESIGNER JADE 35 User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info