609769
41
Zoom out
Zoom in
Previous page
1/84
Next page
4 Program
The programming function on your machine allows you to
create a stitch with your own personal settings and to
combine stitches and letters into stitch programs. You can
add up to 60 stitches and letters in the same program. Save
your own stitch or program in the machine memory and
recall it any time you like.
All stitches in your sewing machine are programmable except
for buttonholes, darning stitches, button sewing and bartacks.
Create a Stitch Program
Program mode
1. Press the program mode button (D) to open
programming.
2. The stitch menu which was previously selected will be
kept when entering the programming mode. To change
the stitch menu, press the stitch menu button (A) and
select another stitch menu by using the arrow buttons.
3. Press the number of the stitch you wish to use. The stitch
will appear in programming mode.
4. Press the number of the next stitch and it will appear to
the right of the last entered stitch.
Note: The number above the stitch program on the left side of the
graphic display is the number of the selected stitch. Two numbers are
displayed above the stitch program on the center of the graphic display.
The first number is the position of the selected stitch in the program. The
second number, put in parenthesis, is the total number of stitches in the
program.
Add Letters
5. Press the font menu button (B). Use the arrow buttons to
select a font and press OK. The machine will show the
upper case alphabet in programming mode.
6. Use the arrow buttons to select a letter and press OK to
add the letter to the program.
7. To switch to a lower case alphabet or numbers press the
shift button (C).
About Programming Letters
Above: “Husqvarna” and “VIKING” have been programmed
separately.
Below: “Husqvarna” and “VIKING” are in the same program.
Both upper and lower case letters will be stitched with a 7
mm stitch width. If there are letters going below the baseline
included in the program (e.g. j, p, y) the height of the
uppercase letters will be reduced.
All text to be sewn out on the same project, should be in the
same program to ensure the letters are sewn out in the same
height.
For instance, a name and an address should be in the same
program with a STOP after the name.
4 Program 41
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna DESIGNER JADE 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna DESIGNER JADE 35 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna DESIGNER JADE 35

Husqvarna DESIGNER JADE 35 User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info