609741
37
Zoom out
Zoom in
Previous page
1/198
Next page
Threading for Twin Needle
Replace the sewing needle with a twin needle. Make sure that
the presser foot and needle are in the up position.
1. Raise both spool pins to vertical position. Place a thread
spool on each spool pin.
Using both hands, place the thread from the main spool
pin behind the left clip on the telescopic thread guide
(A), from right to left, and then place the thread from
the auxiliary spool pin behind the right clip on the
telescopic thread guide (B), from right to left.
Note: Do not place the thread from the auxiliary spool pin
behind both clips on the telescopic thread guide, as this will create
too much thread tension.
Note: When using large thread cones on the auxiliary spool pin, place
the large spool holder with the flat side up and a cone holder on the spool
pin before adding the thread cone.
2. Hold both threads with two hands as illustrated. Floss
the threads under the thread guide (A) from front to
back. Pull the threads together back into and through
threading slot (B).
Note: Continue to hold the threads lightly next to the thread guide
(A) throughout the threading process. This will create a bit of
tension on the threads and ensure that the threads are properly
seated in the threading path.
2 Preparations 37
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna DESIGNER EPIC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna DESIGNER EPIC in the language / languages: English as an attachment in your email.

The manual is 9,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna DESIGNER EPIC

Husqvarna DESIGNER EPIC User Manual - French - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info