609741
35
Zoom out
Zoom in
Previous page
1/198
Next page
Using the Automatic Needle Threader
The needle threader allows you to thread the needle
automatically by simply touching a button.
Make sure that the needle is inserted correctly and pushed up
all the way into the needle clamp before using the automatic
needle threader. Check that the needle is not damaged or
bent, and make sure to match the thread weight and needle
size according to our recommendations in Selecting Correct
Thread/Needle Combination, page 34.
1. Place the thread under the hook (A) and pull it between
the discs (B) until it “clicks” into place.
2. Pull the thread up to the sewing head thread cutter and
cut excess thread by pulling the thread from back to front
in the thread cutter.
3. Touch the automatic needle threader button on the
sewing head. The presser foot is automatically lowered
during the threading sequence, and will raise again when
threading is finished.
The needle threader is designed to be used with needles size 70-120. You cannot use the needle threader with needles size 65 or smaller,
wing needles, twin needles or triple needles.
Specialty threads such as invisible and other stretchy threads, metallic or flat metallic threads, and some heavy weight threads may not be
caught correctly by the hook on the automatic needle threader. If this happens, the needle will not be threaded. Try using the automatic
needle threader again or thread the needle manually.
When threading the needle manually, make sure that the needle is threaded from front to back.
The automatic needle threader cannot be used with all optional accessories available for your DESIGNER EPIC™ machine. To avoid
damage to the needle threader and/or optional accessory we recommend using the automatic needle threader before attaching the accessory
or thread the needle manually.
Before using the needle threader with the Sensor One-Step
Buttonhole Foot attached, lift the wheel of the foot up to
avoid damage to the needle threader and foot.
2 Preparations 35
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna DESIGNER EPIC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna DESIGNER EPIC in the language / languages: English as an attachment in your email.

The manual is 9,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna DESIGNER EPIC

Husqvarna DESIGNER EPIC User Manual - French - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info