517458
114
Zoom out
Zoom in
Previous page
1/134
Next page
8:12
Embroidery Stitch-Out
Change thread color
When it is time to change the needle thread, the machine
stops and the upper thread is cut. Change the spool of
thread and re-thread the machine. The next recommended
color number is shown in the pop-up message.
Cut thread end
After changing the thread, the machine will sew a few
stitches and then stop so you can cut the thread end.
Note: When Automatic Jump Stitch Trim is selected in the SET
menu, the thread end will be cut automatically. Simply remove the
thread tail that has been cut.
Embroidery is À nished - Clear screen?
When the embroidery is À nished, the machine will ask
you if you want to clear the screen. If you touch OK, the
designs will be deleted and you will go back to Embroidery
Edit. Touch Cancel to get back to your design and stay in
Embroidery Stitch-Out.
Design Positioning
Raise needle
When the needle is lowered with the handwheel to check
the needle position on the fabric, a pop-up message is
displayed when trying to adjust the hoop position. Check
the box to be able to À ne tune the hoop position with the
needle lowered.
Note: Make sure the needle is above the fabric to prevent damage to
the needle and fabric.
Note: The warning cannot be disabled when the needle is below the
stitch plate.
114


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer Diamond at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer Diamond in the language / languages: English as an attachment in your email.

The manual is 10,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer Diamond

Husqvarna Designer Diamond User Manual - German - 134 pages

Husqvarna Designer Diamond User Manual - Dutch - 134 pages

Husqvarna Designer Diamond User Manual - French - 134 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info