517458
83
Zoom out
Zoom in
Previous page
1/134
Next page
A
6:3
Embroidery Set Up
Built-In Designs
Over 150 designs are included in the memory in your
machine and some designs are stored on your USB
embroidery stick. All these designs are also included on the
DESIGNER DIAMOND™ Sampler CD for backup if
you temporarily want to remove them from the machine
memory or USB embroidery stick.
DESIGNER DIAMOND™ Sampler Book
Page through the DESIGNER DIAMOND™ Sampler
book for designs and fonts.
The design number, stitch count (number of stitches in
the design) and the design size are displayed next to each
design. The suggested thread color for each color block is
shown.
Connect the embroidery unit
1. Slide the sewing accessory tray off.
2. There is a covered socket at the back of the machine.
Turn the cover to the right to open it. The embroidery
unit plugs into the socket.
3. Slide the embroidery unit onto the free arm of the
machine until it plugs À rmly into the socket. If needed,
use the level adjusting feet so that the machine and
embroidery unit are even. If the machine is turned off,
turn it on.
4. A pop-up message tells you to clear the embroidery
arm and remove the hoop for positioning. Touch OK.
The machine will calibrate and the embroidery arm will
move to the ready position.
Note: DO NOT calibrate the machine with the embroidery hoop
attached as this can damage the needle, presser foot, hoop and/or
the embroidery unit. Be sure to clear all materials from around the
machine before calibrating so that the embroidery arm does not bump
into anything while calibrating.
Remove the embroidery unit
1. To store the embroidery unit in the embroidery case,
move the embroidery arm to Park Position by selecting
Park Position on the screen in either Embroidery Edit
or Embroidery Stitch-Out.
2. Press the button at the left, underneath the embroidery
unit (A) and slide the unit to the left to remove it.
3. Store the embroidery unit in the original packing
material, place in the soft carrying bag.
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer Diamond at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer Diamond in the language / languages: English as an attachment in your email.

The manual is 10,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer Diamond

Husqvarna Designer Diamond User Manual - German - 134 pages

Husqvarna Designer Diamond User Manual - Dutch - 134 pages

Husqvarna Designer Diamond User Manual - French - 134 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info