517458
84
Zoom out
Zoom in
Previous page
1/134
Next page
A
B
6:4
Embroidery Set Up
To hoop the fabric
For the best embroidery results, place a layer of stabilizer
beneath the fabric. When hooping stabilizer and fabric
make sure that they are smooth and securely hooped.
1. Open the Quick Release (A) on the outer hoop and
loosen the screw (B). Remove the inner hoop. Place
the outer hoop on a À rm Á at surface with the screw on
the lower right (B). There is a small arrow in the center
of the lower edge of the hoop which will line up with
a small arrow on the inner hoop.
2. Place the stabilizer and fabric, with the right sides
facing up, on top of the outer hoop. Place the inner
hoop on top of the fabric with the small arrow at the
bottom edge.
3. Push the inner hoop À rmly into the outer hoop.
4. Close the Quick Release (A). Adjust the pressure of
the outer hoop by turning the retaining screw (B). The
fabric should be taut in the hoop for the best results.
Slide on the hoop
Make sure that the accessory tray on the embroidery unit is
closed. Slide the hoop connector into the hoop attachment
from front to back until it clicks into place.
To remove the hoop from the embroidery arm, press the
grey button on the hoop attachment and slide the hoop
towards you.
Automatic Jump Stitch Trim
This machine features Automatic Jump Stitch Trim. This
function saves you time trimming after the embroidery is
completed. As you embroider, the machine will trim the top
jump stitch thread and pull the thread end to the underside
of the fabric.
The default setting is on. To turn it off, go to the SET
Menu, Machine Settings and deselect Automatic Jump
Stitch Trim.
NOTE: The machine will also cut the thread after you have changed
to a new thread color. When you start embroidering again, hold the
thread end so you can easily remove it after it is cut.
Not all designs are programmed for Automatic Jump Stitch
Trim. Jump stitch trim commands can be added to any
design using the 4D™ Embroidery Software. Read more
about Automatic Jump Stitch Trim in chapter 3.
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer Diamond at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer Diamond in the language / languages: English as an attachment in your email.

The manual is 10,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer Diamond

Husqvarna Designer Diamond User Manual - German - 134 pages

Husqvarna Designer Diamond User Manual - Dutch - 134 pages

Husqvarna Designer Diamond User Manual - French - 134 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info