517455
10
Zoom out
Zoom in
Previous page
1/40
Next page
10
Instruction book/Manual de instrucciones 315, 325, 335
Spool pin
The machine has spool pins suitable for all
types of thread. One of the spool pins (a) is
adjustable – the thread reels off the stationary
spool. Place the spool so that the thread reels
counter-clockwise.
There are two spool holders on the spool
pin. With narrow thread spools, the small
holder (b) is placed in front of the thread. If
you use large thread spools, the large holder
(c) is placed in front of the thread.
Slide the correct size spool holder in place
so the fl at side is pressed fi rmly against the
spool. No space between spool holder and
spool.
There is also a separate spool pin (d) to be
attached onto the machine. The fi ngers on the
extra spool pin fi t into the two holes to the
right of the fi xed spool pin. Push downward
to snap in place.
The large spool holder (c) is placed under the
thread. This spool pin is used when winding
a bobbin from a second spool of thread or
for a second spool when sewing with a twin
needle.
Porta-carrete
La máquina tiene los porta-carretes que se
adapta a todo tipo de bobinas. Se puede
utilizar en posición diferentes – el hilo se
desenrolla y la bobina está parada (a).
El porta-carrete está equipado con dos discos
guía-hilo.
Si se tienen bobinas pequeñas se debe poner
el disco pequeño (b) delante de la bobina. Si
se tienen bobinas grandes, se debe poner el
disco grande (c) delante de la bobina.
Ponga el disco de manera que sus parte plana
esté contra la bobina. No debe haber juego
entre el disco y la bobina.
La máquina también tiene un porta-carrete
suelto (d) que se monta en la máquina. El
gancho del porta-carrete se introduce en los
dos agujeros a la derecha del porta-carrete
jo empujándolo hacia abajo. El disco grande
(c) se coloque como zócalo. Este porta-car-
rete se utiliza al bobinar separadamente o al
coser con una aguja gemela.
b
c
d
a
c
d
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Daisy 315 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Daisy 315 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info