517455
8
Zoom out
Zoom in
Previous page
1/40
Next page
8
Instruction book/Manual de instrucciones 315, 325, 335
Connecting the foot
control
Among the accessories you will fi nd the foot con-
trol cord and the main cord.
1. Remove the foot control cord. Place the foot
control on its narrow side. Fit the plug into the
socket inside the foot control compartment.
2. Push it fi rmly to make sure it is properly
con-nected. This ope ra tion is only necessary
the very fi rst time you are going to use the
machine.
3. To correctly turn away the cord, place it into
the slot, see picture.
Note: Before plugging in, check to ensure that
the foot control is of ”type FR2”.
Connecting to the
power supply
On the underside of the
machine you will fi nd
information about the
power supply (V) and the
frequency (Hz). Check the
power supply setting in the
machine to ensure that this
agrees with the main supply
before you connect the
machine.
1. Connect the foot control
cord to the fi rst socket on
the bottom right side of the machine.
2. Connect the main cord to the back socket on
the bottom right side of the machine.
3. When you press the power switch, both the
machine and the light are switched on.
For the USA and Canada
This Sewing Machine has a polarized plug (one
blade wider than the other). To reduce the risk
of electric shock, this plug is intended to fi t in a
polarized outlet only one way. If the plug does not
t fully in the outlet, reverse the plug. If it still does
not fi t, contact a qualifi ed electrician to install the
proper outlet. Do not modify the plug in any way.
Conexión del pedal
El cable del pedal está entre los accessorios. Este
cable ha de conectarse al mando de pie.
1. Sacar el cable del pedal. Ponga de canto el pe-
dal. Introducir la clavija pequeña en el zócalo
dentro del mando de pie.
2. Controlar que la clavija de contacto está bien
ja. Esto solo ha de hacerse la primera vez,
cuando se desembala la máquina.
3. Para poder desenrollar correctamente el cable,
colóquelo en la ranura según la fi gura.
!
Atención! Controlar que el pedal tiene la
marca ”type FR2”.
Debajo del zócalo están
indicadas la tensión (voltaje)
y la frecuencia (Hz). Antes
de conectar la máquina a
red, asegurarse de que los
valores indicados coincidan
con los de la red.
1. Conectar el cable del
pedal en la entalladura
central abajo en el lado
derecho de la máquina.
2. Conectar el cable de la
red en el enchufe trasero, debajo del lado
derecho de la máquina.
3. Al pulsar el interruptor principal, se conecta la
máquina y la iluminación.
Conexión eléctrica
3
1
2
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Daisy 315 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Daisy 315 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info