Manual Husqvarna CTH182T (page 24 of 96) (English, German, Dutch, French, Italian, Spanish)

477581

Zoom out

Zoom in

1/96

To Assemble Bagger

• Unfold bag by pivoting front bagger tube all the way

forward and pressing the bottom vinyl binding onto the

tube.

• Inside the bag, install spreader bars and retainer springs

onto pins on both sides of bag as shown.

• Press the vinyl bindings onto the sides of front bagger

tube.

NOTE: For tractors with an electric dump system, refer to the

kit instructions for more assembly procedures.

Manual bagger dumping only:

• Slide the bagger dump handle through the hole in the

bagger top, install the clevis pin 10 x 44mm and secure

with retainer spring.

• Push cap over end of bagger dump handle.

NOTE: For future use, the clevis pin may be removed in order

to use the handle to clear the chute in the event it has become

clogged.

1. Top Surfaces Even

2. Horizontal Adjustment Brack et

3. Vertical Adjustment Brack et

4. Bagger Latch

02967

6MM (1/4") - 9MM (3/8")

To convert to bagging, mulching or discharge

See "Sec tion 5" of this manual.

02983

10MM (7/16") - 16MM (5/8")

Bagger adjustment

For proper bag function and appearance, it may be nec es-

sary to adjust the bagger assembly. There should be 6mm

(1/4")-9mm (3/8") gap between the bagger top and fender and

the bagger top surface should be even with the top surface

of the fender. To adjust bagger position:

Horizontal adjustment

• Slightly loosen the nuts securing the bagger RH and LH

hor i zon tal adjustment brackets. Loosen only enough so

the brackets keep their position, but allow them to be

moved.

• Move the brackets the amount forward or back ward you

wish the bag assembly to move. Retighten the nuts

securely.

Vertical adjustment

• Slightly loosen the nuts securing the vertical adjustment

brackets. Loosen only enough so the brackets keep their

position, but allow them to be moved.

• Move the brackets the amount up or down you wish the

bag assembly to move. Retighten the nuts securely.

• Reinstall the bagger as sem bly and check the bagger to

fender fit. If necessary, repeat the procedure until proper

fit is attained.

• After proper fit is attained, remove bagger from tractor

and install bagger latch (4) to tractor back plate as shown.

Tighten securely.

• Install and carefully lower bagger to actuate latch.

• Measure distance between bagger and latch as shown.

If distance is not 10mm - 16mm carefully remove bagger

and repeat vertical adjustment as needed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna CTH182T in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna CTH182T Manual

Product: