585401
58
Zoom out
Zoom in
Previous page
1/84
Next page
58
1
2
6. Maintenance, adjustment. 6. Wartung (Instandhaltung),
Einstellung. 6. Entretien, réglages. 6. Mantenimiento, ajuste.
6. Manutenzione. 6. Onderhoud, afstelling.
(1) Hood
(2) Headlight wire connector
(1) Motorhaube
(2) Scheinwerferanschluß
Engine hood
Raise hood.
Unsnap headlight wire connector.
Stand in front of tractor. Grasp hood at sides, tilt forward
and lift off of tractor.
To reinstall, slide hood pivot brackets into slots in frame.
Reconnect headlight wire connector and close hood.
Motorhaube
Motorhaube hochklappen.
Scheinwerferanschluß lösen.
Vor den Mäher treten. Motorhaube an den Seiten
anfassen, nach vorn kippen und aus dem Mäher
herausheben.
Beim Wiedereinsetzen die Stützstreben der Motorhaube
in die Schlitze des Rahmens schieben.
Scheinwerferanschluß wieder anschließen und die
Motorhaube schließen.
WARNING!
Before servicing the engine or cutting unit the following shall
be carried out:
Press down the clutch/brake pedal and engage the
parking brake lever.
Put gear lever in neutral.
Move connection/disconnection lever to disengaged
position.
Switch off engine.
Remove the ignition cable from the plug.
WARNUNG!
Vor Wartungsmaßnahmen an Motor oder Mähaggregat
sind folgende Maßnahmen durchzuführen:
Kupplungs-/Bremspedal durchtreten und
Feststellbremse ansetzen.
Getriebeschalthebel auf Leerlauf stellen.
Schalthebel des Mähaggregats in ausgekuppelte
Stellung stellen.
Motor abstellen.
Zündkabel von der Zündkerze abnehmen.
ATTENTION, DANGER!
Avant toute intervention sur le moteur ou l'unité de coupe
suivre les instructions ci-après:
Enfoncer la pédale de frein/embrayage pour mettre le
frein de parking.
Mettre le levier de vitesses sur la position neutre.
Débrayer les lames.
Arrêter le moteur.
Débrancher le câble d'allumage de la bougie.
ADVERTENCIA!
Antes de proceder a efectuar el servicio en el motor o en el
equipo de corte, hay que hacer lo siguiente:
Apretar el pedal del embrague/freno y acoplar el freno
de estacionamiento.
Poner la palanca de cambios en punto neutro.
Poner la palanca de embrague en posición
desembragada.
Parar el motor.
Quitar el cable de encendido de la bujía.
ATTENZIONE!
Prima di ogni intervento effettuare quanto segue:
Premere il pedale freno/frizione e indserire il freno di
parcheggio.
Mettere la leva del cambio in folle.
Disinserire il tagliaerba.
Spengere il motore.
Staccare la candela.
LET OP!
Voordat service-werkzaamheden aan de motor of maaikast
worden verricht, dient men het volgende te doen:
Druk de koppelings/rempedaal in en trek de
parkeerremhendel aan.
Zet de versnellingshendel in neutrale stand.
Breng de koppelingshendel in ontkoppelde stand.
Zet de motor af.
Verwijder de ontstekingskabel van de bougie.
NL
Eng
F
Esp
Eng
Eng
Downloaded from www.Manualslib.com manuals search engine
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna CTH160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna CTH160 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info