8 Transportation, storage and disposal
8.1 Safety instructions for
transportation
• Use an approved transport vehicle for
transportation of the product.
• A markets national or local regulations can set limit
to the transportation of the product.
• The operator of the transport vehicle is responsible
to attach the product safely during transport. Refer
to
To safely attach the product for transport on
page 50
.
8.1.1 To safely attach the product for
transport
• Attach the product with 3 straps, one on the
front handle and one on each side handle of the
product. The maximum force is 300 N for each
strap.
8.2 To put the product into storage
• Charge the product fully. Refer to
To charge the
battery on page 31
.
• Set the product to OFF. Refer to
To set the product
to OFF on page 31
.
• Clean the product. Refer to
Clean the product on
page 36
.
• Put the product in a dry, frost-free area.
• Put the product with all wheels on level ground.
Note: If you keep the charging station outdoors, do
not disconnect the cable.
8.3 Transportation of batteries
The supplied Li-ion batteries obey the Dangerous Goods
Legislation requirements.
• Obey all applicable national regulations.
• Obey the special requirement on package and
labels for commercial transportations, including by
third parties and forwarding agents.
8.4 Disposal
• Obey the local recycling requirements and
applicable regulations.
• For questions about how to remove the battery,
refer to
To remove the battery on page 50
.
8.4.1 To remove the battery
WARNING: Use protective gloves and
protective shoes.
CAUTION: Only remove the batteries
when you dispose the product. The
Husqvarna warranty is not applicable if you
remove the warranty seal.
1. Remove the top cover.
2. Loosen the clips with the flat screwdriver on the
Combi tool and remove the rear bumper.
50 - Transportation, storage and
disposal
1691 - 007 - 22.12.2023
