734002
16
Zoom out
Zoom in
Previous page
1/28
Next page
You should plan the strip so that you avoid going
over ditches or other obstacles on the ground. You
should also orient the strip to take advantage of wind
conditions, so that cleared stems fall in the cleared
area of the stand.
On sloping ground you should work along the slope.
It is much easier to work along a slope than it is to
work up and down it.
If the stems are tightly packed, adapt your walking
pace to suit.
If the machine is operated at temperatures below -
10°, the product and the battery must be stored in a
heated space for at least 24 hours before starting
work.
To use the product
WARNING: Do not stay directly below a
branch that is being cut. This can result in
death or injury.
Be careful when you operate near overhead power
lines. Falling branches can result in short-circuiting.
If possible, position yourself so that you can make
the cut at right angles to the branch.
Cut large branches in sections. Note that falling
branches can bounce in the direction of the user
after hitting the ground.
Never cut through the swelling at the root of the
branch as this will slow down healing and increase
the risk of fungal attack!
Use the stop at the base of the cutting head to
provide support during cutting. This will help prevent
the cutting attachment from ”jumping” on the branch.
Make an initial cut on the underside of the branch
before cutting through the branch. This will prevent
tearing of the bark, which could lead to slow healing
and cause permanent damage to the tree. The cut
should not be deeper than 1/3 of the branch
thickness to prevent jamming. Keep the chain
running while you withdraw the cutting attachment
from the branch to prevent it jamming.
Make sure you have a firm footing and that you can
work without being hampered by branches, stones
and trees.
WARNING: Never activate the power
trigger without having the cutting
attachment in full view.
16 774 - 003 - 28.05.2019
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna 530iPX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 530iPX in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna 530iPX

Husqvarna 530iPX User Manual - German, Dutch, French - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info