734002
15
Zoom out
Zoom in
Previous page
1/28
Next page
To start the product
1. Push and hold the start/stop button until the green
LED is on.
2. Use the power trigger to control the speed.
To use the SavE function
This product has a power saving function, SavE. The
SavE function decreases the chain speed and gives the
longest operation time from the battery.
Note: The SavE function does not decrease the cutting
power of the product.
1. Push the SavE button on the keypad.
2. Make sure that the green LED comes on.
3. Push the SavE button again to disconnect the
function. The green LED goes out.
To stop the product
1. Release the power trigger or the power trigger
lockout.
2. Push the start/stop button until the green LED is off.
3. Push the release buttons on the battery and pull the
battery out.
To fell a tree
Do not fell trees into uncleared areas.
When you cut, do the work in the 9 to 12 o' clock
sector.
Recommended maximum diameter for the trees to
be cut is 15 cm / 6 in.
A stump at the waist height can make the tree fall in
the target direction as far as possible.
When you cut with the push stroke and pressure, the
tree falls rearward in relative to the guide bar.
When you cut with the pull stroke, the tree falls
forward in relative to the guide bar.
Use the guide bar to steer the tree into the target
direction of fall. For large trees, use the branch hook
behind the guide bar.
Make sure that the tree falls after the trunk is cut
through and before you move the product.
General work instructions
WARNING: Be careful when you cut a tree
that is in tension. It can spring to its former
position and hit you or the product, and
cause injury.
Do a check of the work area.
Clear an open space at one end of the work area,
and start the work from there.
Work systematically to and fro across the area,
clearing a width of around 4-5 m/13-16 ft on each
pass. This exploits the full reach of the machine in
both directions and gives the operator a convenient
and varied working area to work in.
774 - 003 - 28.05.2019
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna 530iPX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 530iPX in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna 530iPX

Husqvarna 530iPX User Manual - German, Dutch, French - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info