733974
24
Zoom out
Zoom in
Previous page
1/36
Next page
Battery information
Refer to the operator's manual of the battery for
information about how to use the battery.
To start the product
Note: The product identifies the cutting attachment when
the cutting attachment is changed, is started and the
throttle is pressed. The product stops and the LED
flashes until the throttle is released and moves back to
its initial position. The cutting attachment is at this time
identified and prepared for operation.
1. Press and hold the start button until the green LED is
lit.
2. Use the power trigger to control the speed.
To operate the product
Automatic shutdown function
The product has an automatic shutdown function that
stops the product if the product is not used. The green
LED for start/stop indication goes off and the product
stops after 120 seconds.
To start the SavE function
The product has a power saving function. The SavE
function gives the longest operation time from the
battery.
1. Push the SavE button to start the function. The
green LED comes on to show that the function is on.
2. Push the SavE button again to stop the SavE
function.
To change the operation direction of the
trimmer head
It is possible to change the operation direction of the
trimmer head. This can be done at full speed or at stop
position. In the factory, the trimmer head is set to turn
clockwise. The green LED is off when the trimmer head
turns clockwise.
1. Push the operation direction button to make the
trimmer head turn counterclockwise. The green LED
is on when the trimmer head turns counterclockwise.
Note: It is easier to tap out the trimmer line to make it
longer when the trimmer head turns clockwise.
To loosen cut material from the grass blade/grass cutter
If a grass blade/grass cutter is used, the rotation
direction is counterclockwise. A green LED shows that
the grass blade/grass cutter rotates counterclockwise.
Change rotation direction to clockwise to loosen the cut
material from the grass blade/grass cutter.
1. Push the rotation direction button to change the
rotation direction.
Note: When the rotation direction is changed to
clockwise, cut material is loosened from the grass blade/
grass cutter. The speed of the grass blade/grass cutter
decreases for a short period of time before it rotates
counterclockwise again.
To balance the product
Connect the harness to the support hook (A) or the
loop hanger (B) on the product.
B
A
Keep the cutting attachment parallel to the ground.
The product is correctly balanced when the blade is
at cutting height near the ground.
24
757 - 003 - 24.06.2020
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna 520iRX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 520iRX in the language / languages: English as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna 520iRX

Husqvarna 520iRX User Manual - German, Dutch, French - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info