477691

Husqvarna 125BVx Manual

10
Zoom out
Zoom in
Previous page
1/320
Next page
1. Align the rib on the upper blower tube with the
groove in the blower outlet. Move the tube into
position.
2. Turn the bolt clockwise with a screwdriver to attach
the tube.
Note: Do not use any tool on the nut.
3. Align the slots on the lower blower tube with the tabs
on the upper blower tube. Move the lower blower
tube onto the upper blower tube.
4. Turn the lower blower tube clockwise until there is a
click.
To install the collection bag with
different vacuum tubes
WARNING: Turn off the engine before you
attach the the tubes to the product.
To assemble the collection bag
1. Open the collection bag.
2. Insert the collection bag tube from inside of the bag
to fit in the vacuum inlet opening.
3. Make sure that the elastic seats in the groove (A).
4. Close the zipper on the bag. (Fig. 18)
To install the collection bag tube
1. Remove the blower tube, if it is attached.
2. Align the rib on the collection bag tube (A) with the
groove in the blower outlet (B).
3. Push the collection bag tube fully onto the blower
outlet.
4. Insert the nut (C) in its opening.
5. Install the screw (D) and tighten with a screwdriver to
attach the tube. (Fig. 19)
To attach the vacuum tubes together
1. Align the arrow on the lower vacuum tube (A) with
the arrow on the upper vacuum tube (B).
2. Push the lower vacuum tube into the upper vacuum
tube.
3. Use a screwdriver to install the self-tapping screw
(C) that holds the tubes together. (Fig. 20)
To install the vacuum tubes
1. Insert the tip of a screwdriver into the latch area of
the vacuum inlet.
2. Turn the screwdriver to release the latch. (Fig. 21)
3. Hold the vacuum inlet cover open until the upper
vacuum tube is in place.
4. Align the ribs on the inside of the vacuum inlet with
the slots on the upper vacuum tube. Make sure the
lock symbol on the tube aligns with the unlock
symbol on the vacuum inlet. (Fig. 22)
5. Push the upper vacuum tube fully onto the vacuum
inlet.
6. Turn the upper vacuum tube clockwise until the lock
symbol on the tube aligns with the lock symbol on
the vacuum inlet. The tube makes a click when it is
correctly attached. (Fig. 23)
Operation
WARNING: Read and understand the safety
chapter before you operate the product.
Fuel
To use fuel
CAUTION: This product has a two-cycle
engine. Use a mixture of gasoline and two-
cycle engine oil. Make sure to use the
correct quantity of oil in the mixture.
Incorrect ratio of gasoline and oil can cause
damage to the engine.
Gasoline
CAUTION: Do not use gasoline with an
octane number less than 90 RON (87 AKI).
This can cause damage to the product.
CAUTION: Do not use gasoline with more
than 10% ethanol concentration (E10). This
can cause damage to the product.
CAUTION: Do not use leaded gasoline. This
can cause damage to the product.
• Always use new unleaded gasoline with a minimum
octane number of 90 RON (87 AKI) and with less
than 10% ethanol concentration (E10).
• Use gasoline with a higher octane number if you
frequently use the product at continuously high
engine speed.
• Always use a good quality unleaded gasoline/oil
mixture.
Two-cycle engine oil
• Use only high quality two-cycle engine oil. Use only
an air cooled engine oil.
• Do not use other types of oil.
10 237 - 009 - 16.12.2019
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna 125BVx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 125BVx in the language / languages: English as an attachment in your email.

The manual is 6,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna 125BVx

Husqvarna 125BVx User Manual - German, Dutch, French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info