35206
66
Zoom out
Zoom in
Previous page
1/72
Next page
66
Problem Cause Correction
Seam puckering
1.The needle thread tension is too tight. 1. Loosen the thread tension.
2.The needle thread is not threaded correctly. 2. Rethread the machine.
3.The needle is too heavy for the fabric being sewn.
3. Choose a needle to suit the thread and
fabric.
4.The stitch length is too long for the fabric. 4. Shorten stitch length.
5.The presser foot pressure is not correctly adjusted. 5. Decrease the presser foot pressure.
Patterns are
distorted
1.The correct presser foot is not used. 1. Select the correct foot.
2.The needle thread tension is too tight. 2. Loosen the thread tension.
The machine
jams
1.Thread is caught in the hook. Remove the upper thread and bobbin case,
turn the handwheel backwards and forwards
by hand and remove the thread and lint.
2.The feed dogs are packed with lint.
The machine is
noisy
1.Lint or oil have collected on the hook or needle bar. 1.Clean the hook and feed dog as described.
2.Poor quality oil has been used. 2.Only use good quality sewing machine oil.
3.The needle is damaged. 3.Replace the needle.
4.Humming sound coming from internal motor. 4.Normal.
5.Thread is caught in the hook.
Remove the upper thread and bobbin case,
turn the handwheel backwards and forwards
by hand and remove the thread and lint.
6.The feed dogs are packed with lint.
Uneven stitches,
uneven feed
1.Poor quality thread. 1.Select a better quality thread.
2.The bobbin case is threaded wrong.
2.Remove the bobbin case, the thread and
reinsert correctly.
3.Fabric has been pulled.
3.Do not pull on the fabric while sewing, let it
be fed by the feed dogs.
The sewing
machine does
not operate
1.The machine is not turned on. 1.Turn on the machine.
2.The presser foot lever is raised. 2.Lower the presser foot lever.
3.The machine is not plugged in.
3.Connect the power line plug to the electric
outlet.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huskystar C10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huskystar C10 in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Huskystar C10

Huskystar C10 User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info