809495
12
Zoom out
Zoom in
Previous page
1/16
Next page
General operating instructions for all models
Operating Instructions
EASY MAINTENANCE ACCESS
Switch the unit off and disconnect from the mains supply. To access the compressor
compartment, simply remove the screws securing the rear access panel – see Fig 1 on page 7.
Any repairs or maintenance, other than CLEANING (see below) must be carried out by
QUALIFIED ENGINEERS ONLY.
CLEANING
The condenser and the compressor compartment MUST be cleaned quarterly. Switch the unit
off and disconnect from the mains supply. See ‘Easy Maintenance Access’ how to access the
compressor compartment. Use a vacuum cleaner fitted with a soft brush attachment to remove
dust carefully from the condenser, the components and grilles – see Fig 2 on page 7.
The external and internal surfaces of the unit should be cleaned regularly. Switch the unit off
and disconnect from the mains supply. Clean the external and internal surfaces of the unit with
a mild soap solution, then wipe dry. Do NOT use cleansers containing chlorine or other harsh
cleansing agents, as these can damage the stainless steel surfaces and components. Use mild
soapy water to clean the gasket and seals.
GETTING SERVICE ASSISTANCE
The cooling system is a hermetically sealed circuit and does not require any maintenance other
than regular cleaning (see ‘Cleaning’).
If the unit fails to work, first check the power supply. If you cannot locate the reason for the
failure, please contact your supplier, stating the model and serial number of the cabinet. You
may find this information on the rating plate, which is affixed inside the unit on the top right-hand
interior wall.
To access the compressor
compartment:
i. Remove the two screws.
ii. Push the removable panel
down slightly to free it
from the securing flange.
iii. Angle the removable panel
forwards and down to
remove it.
i
ii
iii
Exploded Diagrams
CSS1H-SD-SS-NL-HU / Version 11-2022 Page 6 CSS1H-SD-SS-NL-HU / Version 11-2022 Page 7
FSS2H-SD-SS-NL-HU
FSS2H-SD-SS-NL-HU
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husky CSS1H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husky CSS1H in the language / languages: English, Dutch as an attachment in your email.

The manual is 4.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info