685865
27
Zoom out
Zoom in
Previous page
1/36
Next page
25
NOTE: If a Stations Runtime is less than or equal to the
Cycle time then no Cycle will be applied.
NOTE: Before 1 hour only minutes are displayed (36, for
example). At 1 hour or above, the display will change to
include the hour digit (1:13 and 4:00, for example).
ADVANCED FEATURES
Cycle and Soak
The Cycle and Soak feature is an enhancement to the existing X-Core
controller. It is designed to aord customers the ability to minimize
runo due to dierent soil and terrain characteristics.
The Cycle and Soak feature allows you to split a station’s runtime into
shorter watering periods. The shorter watering periods will help prevent
run o in situations like slopes or tight soils. It is recommended that the
Cycle time is less than the station’s watering time, and the Soak time
for the water to be absorbed. The total number of cycles is determined
by taking the total programmed station run time and dividing it by the
Cycle time.
Accessing the Cycle and Soak Menu
With the dial in the RUN position, press and holding the
button for
3 seconds; while holding the button rotate the dial to the RUNTIME
dial position, then release the button.
Setting the Cycle Time
1. Initially Station 1 will be displayed. To
access other stations, press the
or
button.
2. Once the desired station is displayed,
use the
or button to increase or
decrease the Cycle time. The user can
set the time from 1 minute to 4 hours
in 1 minute increments or to OFF if no
Cycle is desired.
Cycle Screen With Only Minutes Cycle Screen With Hours Included
Accessing the Soak Menu
Once the desired Cycle times for each station has been programed the
soak time can be accessed by pressing the
button.
The station will remain the same as was previously displayed under the
Cycle time (if station 2 is displayed in the Cycle menu then Station 2 will
be displayed upon pressing the
button, for example).
NOTE: The Soak menu cannot be accessed without a
programmed Cycle time.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hunter X-Core at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hunter X-Core in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hunter X-Core

Hunter X-Core User Manual - German - 36 pages

Hunter X-Core User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info